madrallysport
|
| posted on 21/5/09 at 08:21 PM |
|
|
Aries motorsport Locoblade wheel size / off set
Guys does any one know what off set the wheels are on aries motorsport locoblades, i'm building a locoblade (very slowly might i ad) but
i've been offered a nice set of wheels at good money but i want to make sure they are the correct of set before i buy them.
[Edited on 21/5/09 by madrallysport]
UNDERSTEER is when you hit the wall with the front of the car.
OVERSTEER is when you hit the wall with the rear of the car.
HORSEPOWER is how fast you hit the wall.
TORQUE is how far you take the wall with you.
|
|
|
|
|
cerbera
|
| posted on 21/5/09 at 10:08 PM |
|
|
I'm sure the offset of my wheels are 19mm. Cant check as I'm off on hols tomorrow.
I'm sure someone else will be along to confirm.
HTH
|
|
|
f1ngers
|
| posted on 21/5/09 at 10:25 PM |
|
|
I have got 14" ET23 offset Minilites on my STM Locoblade which were originally fitted to a Caterham if thats any help
|
|
|
procomp
|
| posted on 22/5/09 at 07:51 AM |
|
|
Hi
It was all based around using the std Ford offset for RWD. Aftermarket wheels for this aplication will vary from 19 - 23. Any of them with that offset
will do but you will struggle to get bigger than 6" wide under the rear arches. But theres no need to go bigger than 205 on the rear in any
case.
Cheers Matt
|
|
|
madrallysport
|
| posted on 22/5/09 at 10:12 AM |
|
|
Cheers guys, i've been offered a set of 5 spoke compomitive wheels, they were fitted to a 106 for one rally, they in mint condition, i think the
off set on them is 38 from memory.
I have seen a picture if an aries car, i think on there site before he put the new gallery bit on to it of a green(ish) coloured car with 1.9 gti
alloys of a 205 on it, that's what got me thinking these would fit my car
UNDERSTEER is when you hit the wall with the front of the car.
OVERSTEER is when you hit the wall with the rear of the car.
HORSEPOWER is how fast you hit the wall.
TORQUE is how far you take the wall with you.
|
|
|
