speedyxjs
|
| posted on 31/5/09 at 01:09 PM |
|
|
Fixing top panel
How have you all fixed your transmission tunnel top cover on (the one that needs to be removable for IVA)?
How long can i resist the temptation to drop a V8 in?
|
|
|
|
|
blakep82
|
| posted on 31/5/09 at 01:13 PM |
|
|
why does it need to be removable?
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
speedyxjs
|
| posted on 31/5/09 at 01:15 PM |
|
|
I have a full floor covering the bottom of the tunnel and IVA inspector will need to inspect pipes and wires going through.
How long can i resist the temptation to drop a V8 in?
|
|
|
blakep82
|
| posted on 31/5/09 at 01:17 PM |
|
|
ah, i see.
rivuts?
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
speedyxjs
|
| posted on 31/5/09 at 01:18 PM |
|
|
I was looking at them but wasn't sure if they work with a normal rivet gun or if i would need a new one?
How long can i resist the temptation to drop a V8 in?
|
|
|
tomgregory2000
|
| posted on 31/5/09 at 01:20 PM |
|
|
You need to get a riv nut gun as well, I have velcro holding mine on
|
|
|
blakep82
|
| posted on 31/5/09 at 01:20 PM |
|
|
yeah its a special tool you need.
round headed (cross headed) self tapping screws?
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
speedyxjs
|
| posted on 31/5/09 at 01:23 PM |
|
|
I didnt think of velcro 
How long can i resist the temptation to drop a V8 in?
|
|
|
tomgregory2000
|
| posted on 31/5/09 at 02:11 PM |
|
|
quote:
Originally posted by speedyxjs
I didnt think of velcro
Its the first thing i think of.
I also have it holding on my parcel shelf and that was fine at sva as well
|
|
|
stevegough
|
| posted on 31/5/09 at 03:30 PM |
|
|
Every kit builder needs one - mine is made by silverline cost about £13 - similar to this ebay one... You can spend a lot more on them, but I
didn't and it has worked fine for me.
http://cgi.ebay.co.uk/RIVNUT-INSERT-TOOL-GOOD-QUALITY-HAND-WCC-633942-500_W0QQitemZ270345936479QQcmdZViewItemQQptZUK_Hand_Tools_Equipment?hash=item3ef
1df9e5f&_trksid=p3286.c0.m14&_trkparms=72%3A1688|66%3A2|65%3A12|39%3A1|240%3A1318|301%3A0|293%3A1|294%3A50
Luego Locost C20XE.
Build start: October 6th 2008.
IVA passed Jan 28th 2011.
First drive Feb 10th 2011.
First show: Stoneleigh 1st/2nd May 2011.
'Used up' first engine may 3rd 2011!
Back on the road with 2nd engine may 24th
First PASA mad drive 26/7/11
Sold to Mike in Methyr Tydvil 19/03/14
|
|
|
