andy350z
|
| posted on 9/9/09 at 08:48 AM |
|
|
Fitting Ebay Fibreglass Aeroscreen
What is the best way of fitting a fiberglass aeroscreen to a Tiger Avon.
Can I just bond it on with Tiger Seal or similar? Rivet it? Or some type of bolt?
Thanks
Andy
|
|
|
|
|
richwill
|
| posted on 9/9/09 at 09:04 AM |
|
|
I fixed mine with motorbike fairing bolts from Halfords. Rubber type expansion bolts just drilled through and tightened .
|
|
|
melly-g
|
| posted on 9/9/09 at 09:35 AM |
|
|
Fixed mine with small M4 bolts (allen dome head).
|
|
|
Flamez
|
| posted on 9/9/09 at 09:53 AM |
|
|
Rivet in the centre front to hold in place and dome head bolts down the side. I also used "P" edge trim along the join.
 
ns decals
my build mac1motorsports
|
|
|
andy350z
|
| posted on 9/9/09 at 12:21 PM |
|
|
Thanks all, just been to Halfords for some fairing bolts.
|
|
|
andrew.carwithen
|
| posted on 9/9/09 at 05:01 PM |
|
|
Used large black roundhead self-tappers (4mm I think) to fix mine all along leading edge. Oh, and black'tadpole' trim sandwiched between
aeroscreen and scuttle.
[Edited on 9/9/09 by andrew.carwithen]
[Edited on 9/9/09 by andrew.carwithen]
 
Rescued attachment sva3 008.JPG
|
|
|
