Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Fuel Tank, Pump & Filter
Bumble

posted on 19/9/09 at 10:04 AM Reply With Quote
Fuel Tank, Pump & Filter

Advice please.....I have Alloy Racing Fab Sumped Tank, Bosch 0580464077 Fuel Inj Pump and Sytec Filter....see pic. Wanted to mount these at the rear of the car....
1) Do they need to be mounted below/level to the tank outlet?
2) Can they be mounted vertical (upright) or do they have to be horizontal.
Appreciate advice and any pics of similar setups would be great.
Cheers,
Matt Rescued attachment IMG_5101.JPG
Rescued attachment IMG_5101.JPG

View User's Profile View All Posts By User U2U Member
BenB

posted on 19/9/09 at 11:29 AM Reply With Quote
Wot no swirl pot?

Most people use a LP pressure pump below the tank outlet and then a swirl pot (which can be higher) feeding the HP pressure pump and filter pure de-aerated fuel.

If you're not planning on doing this I'd have the HP pressure below the level of the tank and keep them vertical (to prevent trapped air entering the fuel line and not being swirl'd to get rid of it). But personally I'd fit a LP pump and a swirl.

Don't forget an inertia switch to stop the HP pump in case of a prang...

View User's Profile Visit User's Homepage View All Posts By User U2U Member
rusty nuts

posted on 19/9/09 at 02:48 PM Reply With Quote
Most , if not all cars have the fuel pump mounted horizontally . Filters can be either but most seem to be horizontal
View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.