chris taylor
|
| posted on 3/3/10 at 09:24 PM |
|
|
New Bonnet scoop
Just fitted the scoop, had to be increased in height due to the Hayabusa set up, thanks to Ian for the contact.
|
|
|
|
|
beagley
|
| posted on 3/3/10 at 09:58 PM |
|
|
 ........ wow .......
I think I'm in love. BEAUTIFUL car!
I'm not scared!!! I'm just marking my territory.
|
|
|
daniel mason
|
| posted on 3/3/10 at 10:02 PM |
|
|
where was it from? and how much? i also need a large scoop for my engine but was gong to get the carbonmods one which is 67mm tall. do you have the
dims of the scoop? length width height. cheers.
|
|
|
iscmatt
|
| posted on 3/3/10 at 10:08 PM |
|
|
looks like it is ready to eat up big chunks of air, nice!
|
|
|
MakeEverything
|
| posted on 3/3/10 at 10:18 PM |
|
|
Love it.
Kindest Regards,
Richard.
...You can make it foolProof, but youll never make it Idiot Proof!...
|
|
|
Nash
|
| posted on 3/3/10 at 10:24 PM |
|
|
quote:
Originally posted by iscmatt
looks like it is ready to eat up big chunks of air, nice!
Looks like its ready to take small children from the pavement straight into the inlet manifold.
+1 re source and cost please
.....Neil
It's What You Do Next That Counts.
Build It, Buy It, Drive It:
Southern Kit Car Club
|
|
|
ashg
|
| posted on 3/3/10 at 10:34 PM |
|
|
hope mr iva man can't get his ball in there 
Anything With Tits or Wheels Will cost you MONEY!!
Haynes Roadster (Finished)
Exocet (Finished & Sold)
New Project (Started)
|
|
|
omega0684
|
| posted on 3/3/10 at 11:07 PM |
|
|
Jesus! Are you going to be able to see over that
I love Pinto's, even if i did get mine from P&O!
|
|
|
omega0684
|
| posted on 3/3/10 at 11:08 PM |
|
|
quote:
Originally posted by daniel mason
where was it from? and how much? i also need a large scoop for my engine but was gong to get the carbonmods one which is 67mm tall. do you have the
dims of the scoop? length width height. cheers.
available from DAX at the pretty penny of about £80-£100 ! 
I love Pinto's, even if i did get mine from P&O!
|
|
|
franky
|
| posted on 3/3/10 at 11:25 PM |
|
|
looks great, any pics of your bonnet catch as my engine side panels mount the same as yours.
Cheers.
|
|
|
drury318
|
| posted on 4/3/10 at 12:05 AM |
|
|
Can I be cheeky and ask where your seats are from???
Thanks, Dennis.
|
|
|
dave1888
|
| posted on 4/3/10 at 12:08 AM |
|
|
Evil looking car built to accomodate the devil himself 
Wish mine looked that good
|
|
|
Davey D
|
| posted on 4/3/10 at 07:11 AM |
|
|
Whoa! that is a monster size scoop. could it start to work like a parachute, and slow you down? hehe
|
|
|
jabbahutt
|
| posted on 4/3/10 at 07:50 AM |
|
|
awesome looking car, seeing that bearing down in the rear view mirror would be terrifying
|
|
|
chris taylor
|
| posted on 4/3/10 at 08:15 PM |
|
|
Bonnet Scoop
Guys
for those that have shown an interest, the scoop came from a contact provided by Ian, AKA (iiyama)search for him using the Search engine and mail him
if interested.
Measurements are 9cm High at the front, 44 cm wide and 92cm long, these are the same as the Dax apart from the height, the maker can do either full
Carbon ones or ones like mine from Pre-preg Glass that you can have painted,
cheers,
Chris
|
|
|
Brommers
|
| posted on 4/3/10 at 09:31 PM |
|
|
quote:
Originally posted by ashg
hope mr iva man can't get his ball in there
And that it doesn't interfere with forward vision so it's an IVA fail. My Fury failed SVA first time round as the bonnet bulge was too
high. Mind you, it is quite large...
|
|
|
daniel mason
|
| posted on 4/3/10 at 09:43 PM |
|
|
it looks far wider than 440 mm
|
|
|
chris taylor
|
| posted on 4/3/10 at 09:55 PM |
|
|
Bonnet scoop
Dan, no it is only 44cm wide, angle of picture makes it look bigger than it is, cheers Chris
|
|
|
