speedyxjs
|
| posted on 16/3/10 at 08:33 PM |
|
|
Mounted filter?
Does the fuel filter need to be mounted on the chassis? The reason i ask it that i was riveting the fuel hose on the car today and have fitted the
filter as the picture below with the filter in between the chassis rails above the driveshaft. I just wanted to check it would be IVA ok like this.
How long can i resist the temptation to drop a V8 in?
|
|
|
|
|
big-vee-twin
|
| posted on 16/3/10 at 08:41 PM |
|
|
Mine is fixed to the chassis rails with a proper bracket, I was going to fit mine like yours with a piece of ali sheet bridging the gap, but preferred
this layout in the end
.jpg)
Duratec Engine is fitted, MS2 Extra V3 is assembled and tested, engine running, car now built. IVA passed 26/02/2016
http://www.triangleltd.com
|
|
|
Bluemoon
|
| posted on 17/3/10 at 11:17 AM |
|
|
mines free in line, but it's only a small light weight plastic one (for low pressure carbs...). If it's got any weight to it (when full of
fuel) I would make a bracket...
Dan
|
|
|
speedyxjs
|
| posted on 17/3/10 at 06:44 PM |
|
|
Thanks for the replys. There isnt much weight in it when its full. It doesnt evem move very much by hand.
How long can i resist the temptation to drop a V8 in?
|
|
|
