Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Bolt selection box
londonsean69

posted on 29/6/10 at 07:45 AM Reply With Quote
Bolt selection box

Morning

I have had a bit of a search on here, and on google, and can't seem to find anything.

I am looking to buy a decent selection of bolts and set screws. I don't really want to be buying packets of 50 or 100 when I might only need 4 or 6, so am after some sort of selection box type affair.

I can find them for smaller sizes of sets, eg. up to M8 with a couple of M10, but I am after something that has plenty of M8, M10 and M12, in lengths upto around 80mm.

Any suggestions? Failing that, anybody know of a good place I can put together my own selection, where they sell in packs of 10??

Cheers

Sean






View User's Profile View All Posts By User U2U Member
big_l

posted on 29/6/10 at 07:50 AM Reply With Quote
Mate there is solace near my work they sully engineering people ..I went and bought loads to build my car with and it's a bird who mans the cash desk she only took £15 lol there was loads i can pop in and grab you loads if you want are you attending the airfield track day on the nth at northweild !!!





Check out my blog mnrvortxhayabusa@blogspot.com

View User's Profile E-Mail User View All Posts By User U2U Member
whitestu

posted on 29/6/10 at 08:15 AM Reply With Quote
Orbital fasteners in Watford are pretty good, and quite cheap.

Stu

View User's Profile View All Posts By User U2U Member
Irony

posted on 29/6/10 at 08:47 AM Reply With Quote
namrick






View User's Profile View All Posts By User U2U Member
tegwin

posted on 29/6/10 at 09:34 AM Reply With Quote
For odd sizes, I go to my bolt specialist... but to be honest they are quite expensive...

Namrick are even more so!

I would seriously suggest getting to screwfix and buying half a douzen boxes of bolts and some bags of nuts...

Get some long set screws... you can always cut them to length later...

you never know when an odd bolt will come in handy.

I always have boxes of M6, M8, M10 and a few M12 knocking about...





------------------------------------------------------------------------------------------------------------------------
Would the last person who leaves the country please switch off the lights and close the door!

www.verticalhorizonsmedia.tv

View User's Profile Visit User's Homepage View All Posts By User U2U Member
bmseven

posted on 29/6/10 at 09:58 AM Reply With Quote
KwikFast in Witham have a minimum order of a tenner When I priced up bolts for various jobs (seats, cage etc) it came to £18 from online sources Kwikfast charged me £5 then ended up spending another £20 on tools





BMW 7 Resource
Bures Pit anyone?

View User's Profile Visit User's Homepage View All Posts By User U2U Member
londonsean69

posted on 29/6/10 at 10:33 AM Reply With Quote
Cheers for the replies guys.

Am sorted now, getting a Namrick selection for the smaller stuff, and a few from screwfix for the bigger bits.






View User's Profile View All Posts By User U2U Member
coozer

posted on 29/6/10 at 10:38 AM Reply With Quote
TOOLSTATION





1972 V8 Jago

1980 Z750

View User's Profile Visit User's Homepage View All Posts By User U2U Member
wicket

posted on 29/6/10 at 11:10 AM Reply With Quote
Where ever you get them from make sure that they are the correct grade and quality for purpose.
View User's Profile E-Mail User View All Posts By User U2U Member
loggyboy

posted on 29/6/10 at 11:33 AM Reply With Quote
Screwfix?

http://www.screwfix.com/prods/35870/Bolts/Bolts/Bolt-A2-Stainless-Steel-M10-x-80mm-Pack-of-10

http://www.screwfix.com/prods/14572/Bolts/Bolts/Bolt-A2-Stainless-Steel-M12-x-50mm-Pack-of-10

View User's Profile View All Posts By User U2U Member
londonsean69

posted on 29/6/10 at 11:36 AM Reply With Quote
Many thanks for the further replies, but I am sorted.

The toolstation selection box doesn't have the larger sizes I need.

I am getting grade 8.8 BZP.

A2 stainless is not really suitable for this application, as the SVA man will want to see the grade on them.






View User's Profile View All Posts By User U2U Member
gavin174

posted on 29/6/10 at 03:45 PM Reply With Quote
there was a small stand at Newark selling just bits for roadster...

he sold a complete bolt set for the roadster for £15.00

forgot to get a number...





http://www.essexkitcarclub.com

View User's Profile Visit User's Homepage View All Posts By User U2U Member
Rod Ends

posted on 29/6/10 at 03:56 PM Reply With Quote
Parker Steel have a Parker Tools section which seems to have cheap nuts & bolts.

They are priced in 100s but you can buy smaller amounts at the same individual price.

www.parkertools.co.uk/Product/0679860/M12+BZP+-+8.8+Grade

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.