StuartBJ
|
posted on 22/8/10 at 04:07 PM |
|
|
IRS - How to mount the lower wishbone??
Hi Guys,
Please forgive me for being thick here, I don`t have a copy of uncle Ron`s famous book to hand which i`m sure will reveal the answer.
How do I mount the lower wishbone on to the rear hub adapter plate? The view you see below is the offside rear (back face)....and what is confusing me
is the tube welded in the bottom. From the look of it a long threaded bar goes al the way through the tube and through the poly bushes, but that also
doesn`t sit right with me.
![](/galpreviews/Picture 082.jpg) ![Description](/gallery/Picture 082.jpg) Description
Thanks
|
|
|
mookaloid
|
posted on 22/8/10 at 04:12 PM |
|
|
you have it about right but it should be a long HT bolt not threaded bar.
"That thing you're thinking - it wont be that."
|
|
Flamez
|
posted on 22/8/10 at 04:28 PM |
|
|
Threaded bar on mine no problems, can you get a bolt that long?
my build mac1motorsports
|
|
StuartBJ
|
posted on 22/8/10 at 04:46 PM |
|
|
Thanks Guys..... right I better go buy some threaded bar then LOL
....or a really long bolt
[Edited on 22/8/10 by StuartBJ]
|
|
mookaloid
|
posted on 22/8/10 at 06:00 PM |
|
|
Not sure about the length but MK supply long bolts for their rear wishbones which look just like that.
"That thing you're thinking - it wont be that."
|
|
RAYLEE29
|
posted on 22/8/10 at 06:18 PM |
|
|
Really long bolt on mine but mines a haynes roadster so slightly different to yours but a bolt wiil definately be better than studding
Ray![](/images//smilies/smile.gif)
|
|
angliamotorsport
|
posted on 22/8/10 at 07:08 PM |
|
|
please don't use threaded studding, it wll bend, it is a different material spec
|
|
interestedparty
|
posted on 22/8/10 at 07:18 PM |
|
|
quote: Originally posted by StuartBJ
Please forgive me for being thick here, I don`t have a copy of uncle Ron`s famous book to hand which i`m sure will reveal the answer.
Uncle Ron won't help you, that's the original live axle locost book.
The book that deals with IRS is the Haynes Roadster book written by Uncle Chris (although I don't think it shows how to mount the wishbones)
As some day it may happen that a victim must be found,
I've got a little list-- I've got a little list
Of society offenders who might well be underground,
And who never would be missed-- who never would be missed!
|
|
Liam
|
posted on 22/8/10 at 07:50 PM |
|
|
Studded bar is generally made of chocolate. Unless you can get it in a decent grade of material (I'm not sure) dont use it for your suspension.
|
|
Richard Quinn
|
posted on 23/8/10 at 06:16 AM |
|
|
My Aries is similar and came with suitable bolts (but threaded on either end and I don't actually know what the correct terminology is for
those). I would've thought that you should be able to get them from your chassis supplier.
|
|
alexg1965
|
posted on 23/8/10 at 06:18 AM |
|
|
Alan from AGM supplied me with threaded bar with my WLR kit. Check to see that he shouldn't have done the same with you.
|
|
Bluemoon
|
posted on 23/8/10 at 09:27 AM |
|
|
Threaded bar is o.k if it's HT, i.e. 8.8 rated. The snag is you can't tell by looking at it as there are no marks unlike bolts, so you
might want a long bolt so the IVA man can see the 8.8..
|
|
adithorp
|
posted on 23/8/10 at 09:27 AM |
|
|
Get a long bolt if you can. Bolts will be marked with the strenth whereas you no way of confirming what threaded bar is. Also if threaded bar does
come loose the threads will start wearing the holes a lot quicker than a bolt.
adrian
"A witty saying proves nothing" Voltaire
http://jpsc.org.uk/forum/
|
|
StuartBJ
|
posted on 23/8/10 at 05:51 PM |
|
|
Thanks Alex, spoke to Alan and its on the way
quote: Originally posted by alexg1965
Alan from AGM supplied me with threaded bar with my WLR kit. Check to see that he shouldn't have done the same with you.
![](/images//smilies/bigsmile.gif) ![](/images//smilies/bigsmile.gif) ![](/images//smilies/bigsmile.gif)
|
|
procomp
|
posted on 24/8/10 at 03:06 PM |
|
|
Hi
It's on its way. Is that a section of threaded studding that's on it's way. ?
Cheers Matt
|
|
StuartBJ
|
posted on 13/10/10 at 08:34 PM |
|
|
.....bugger
Well the IRS uses the 14mm threaded bar but Alan from AGM has informed me that a couple of IVA tests have confirmed that the material must be
appropriatly marked for grade (I assume its 8.8 as a miniumu)... therefore Alan at AGM is running off a batch of very long bolts to replace the
offending threaded bar.
So to summerise if you have a 7 or WLR etc and havn`t yet been through the IVA and have threaded bar as part of your IRS this needs to be changed for
bolts that display the material rating.
![](/images//smilies/smile.gif)
|
|
40inches
|
posted on 14/10/10 at 08:19 PM |
|
|
14mm? you sure it's not 12mm? I used M12 x 240 HIGH TENSILE 12.9 ALLEN CAP BOLTS BLACKx 2pcs on eBay (end time 08-Dec-10
09:42:15 GMT) , they do them in different lengths.
|
|