AndyW
|
posted on 1/3/11 at 06:39 PM |
|
|
paper mache
Odd request I know but bear with me. I attempted to make paper mache models for my daughter. I used a home made locost glue. Water and flour. it did
work but took ages to dry and is very fragile. Now, I picked her up from pre-school today and she asked me if her model hot air balloon was ready. I
have not got any wall paper paste so I told her I would try and finish it tonight ready for her to paint tomorrow.
So, can anyone offer some advice as to a locost option that will set hard and fairly fast. i need to use something that maybe lying around the house
or in the shed. What can I use??
Answers below please.
|
|
|
Slater
|
posted on 1/3/11 at 06:45 PM |
|
|
yes flour and water mix for the glue is correct. My advice would be to put it in the airing cupboard to dry it quicker.
I had to make a paper mache ladybird recently and used a cycle helmit as a mould.
Why do they call Port Harcourt "The Garden City"?...... Becauase they can't spell Stramash.
|
|
blakep82
|
posted on 1/3/11 at 06:45 PM |
|
|
PVA glue is what they use on blue peter!
think its the same as wood glue?
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
cliftyhanger
|
posted on 1/3/11 at 07:16 PM |
|
|
yes, more of less. Dilute a little with water and off you go.
Always found wallpaper paste is the best though, go scrounging off the neighbours, somebody is bound to have some
|
|
jacko
|
posted on 1/3/11 at 07:43 PM |
|
|
PVA / wood glue watered down then use blue paper hand towels riped in strips my daughter does this quite often
Jacko
|
|
Confused but excited.
|
posted on 1/3/11 at 09:51 PM |
|
|
Too late now but emergency paper glue; egg white.
Tell them about the bent treacle edges!
|
|
bimbleuk
|
posted on 2/3/11 at 08:06 AM |
|
|
I used just flour and water for a snow man pinata over Christmas and my niece and nephew needed a fair few hits with a stick before it broke so I
think layers are the key as I did at least 3 layers using long thin strips over lapped. You do need to leave plenty of time though as I let each layer
dry over night.
|
|
indykid
|
posted on 2/3/11 at 10:34 AM |
|
|
polyester resin and surface tissue?
|
|
woodster
|
posted on 2/3/11 at 10:52 AM |
|
|
you can get 5min PVA great for last minute homework
|
|
DarrenW
|
posted on 2/3/11 at 03:44 PM |
|
|
Why not cheat with a fibreglassing kit from Halfords and cover that with papier mache so it looks the part?
|
|