westindy
|
posted on 29/12/11 at 10:13 AM |
|
|
BEC Gear Lever mode?
Can someone tell me the set most used for your gear lever position - eg 1st is gear lever pulled back and 5 gears push lever forward or the opposite.
just setting up my linkage now and people seem to have both setups?
Rgds, Paul.
|
|
|
daniel mason
|
posted on 29/12/11 at 10:26 AM |
|
|
i prefered 1st = push then pull back for the rest if using stick shift,but i prefered the paddleshift setup and klicktronic shifter on my last car
|
|
A1
|
posted on 29/12/11 at 10:45 AM |
|
|
i used back first then forward for the rest. would maybe prefer it the other way but im used to it now
|
|
cerbera
|
posted on 29/12/11 at 11:24 AM |
|
|
On my old BEC first was forward then the rest were back.
HTH
|
|
stevec
|
posted on 29/12/11 at 11:30 AM |
|
|
I did 1 forward and five back on my previous engine, its probably easier to pull back when accelerating than to push.
Steve.
|
|
BenB
|
posted on 29/12/11 at 11:34 AM |
|
|
I use push to downshif, pull to upshift. When accelerating you are pushed back in your chair and then it's easier to pull backwards and equally
when you're decelerating and straining the straps it's easier to push forwards to downshift.
|
|
bowood14
|
posted on 29/12/11 at 11:39 AM |
|
|
Mine was back first then forward the rest didn't get on with it so have it forward 1st then back rest much more natural flow as already said
above
|
|
ReMan
|
posted on 29/12/11 at 01:04 PM |
|
|
quote: Originally posted by BenB
I use push to downshif, pull to upshift. When accelerating you are pushed back in your chair and then it's easier to pull backwards and equally
when you're decelerating and straining the straps it's easier to push forwards to downshift.
Yep wot he said 4 sure
www.plusnine.co.uk
|
|
matt_gsxr
|
posted on 29/12/11 at 01:24 PM |
|
|
pull to upshift.
|
|
fullpint
|
posted on 29/12/11 at 01:45 PM |
|
|
Mines pull up for first (left side of paddle) and then up again (right side) to go thru the box..
On the shift stick it's back one for 1st then bang it forward to go up thru the box..
I've over 28 years in dealing with magnesium wheels. Refurbishment and can powder coat most metal parts. Visit my web site if you wish..
www.tpcs-magnesium-refurbs.co.uk
|
|
MikeFellows
|
posted on 29/12/11 at 05:13 PM |
|
|
erm.....
I can adjust this?
|
|
mad-butcher
|
posted on 29/12/11 at 05:51 PM |
|
|
As BenB and most others
|
|