DRCorsa
|
posted on 5/1/12 at 08:22 PM |
|
|
Grease types
I am currently dissasembling my CV joints and i want to ask what type of grease do you usually use. In my area graphite based grease is the
"standard" but i as i have read over the net, lithium-moly grease is even better.
Here is a good link: http://www.tsmoly.com/faq_choose.php
What would you suggest?
|
|
|
matt_gsxr
|
posted on 5/1/12 at 10:17 PM |
|
|
I use the little grease packets that come with the CV boot kit as it is the right amount and the correct kind.
|
|
big-vee-twin
|
posted on 5/1/12 at 10:20 PM |
|
|
I've used lithium-Moly anything based upon petroleum products will rot the rubber.
Duratec Engine is fitted, MS2 Extra V3 is assembled and tested, engine running, car now built. IVA passed 26/02/2016
http://www.triangleltd.com
|
|
DRCorsa
|
posted on 5/1/12 at 10:20 PM |
|
|
@matt_gsxr
Thanks for that but it happens that i am not replacing my boots as they are in pretty good shape.
[Edited on 5/1/12 by DRCorsa]
|
|
steve m
|
posted on 6/1/12 at 11:25 AM |
|
|
Would the lithium-Moly be the best for track rod ends/top and bottom ball joints as well?
as i will replace all the rubbers, as a couple are splitting
Steve
|
|