scootz
|
posted on 15/2/12 at 04:59 PM |
|
|
FS: Registered F27 Chassis, KV6 Engine, RX7 Gearbox
Not sold anything for a while and I'm getting withdrawals, so...
FORMULA 27 CHASSIS & BITS - PROVISIONALLY SOLD
From a car that was SVA'd in 2004 with an old V8 engine, so future MOT emissions test will be a doddle no matter what you choose to put in it!
V5 shows age related plate ('V' suffix).
It comes with all the parts shown in the photo's... the shocks are AVO's, the oil filter adapter is Mocal, the axle is a Koln, the rack /
uprights are Cortina, the front brakes are Escort, and the rear drums are 9"s. I've no idea what brand the fuel pump and oil cooler
are.
The current pedal box is set up for an auto, but I guess it could be adapted for a manual.
Also comes with nosecone, rear wings and windscreen (not shown).
In good structural nick, but riddled with rivet-bodies that will need removed!
The passenger footwell panel has a hole in it and will need replaced or patched.
Price? I've not got a scooby-doo! Feel free to debate on this thread what a fair price should be and chuck offers at me! Please bear in
mind though that this chassis is REGISTERED so NO IVA (instant £450 fee saving and major headache avoidance!). Re-build it any way you want with
whatever engine you want to use and all you will need to do is MOT it before you hit the road!
I could help out with nationwide delivery at a reasonable cost!
MG KV6 ENGINE & TRIUMPH TB'S
Engine, flywheel and clutch from an MG ZS 180 as pictured.
Please note that there is no belt-train cover (I'd planned to make my own one using a thin ali sheet).
I've never run it, but it turns over freely by hand.
Comes with two sets of Triumph 675 throttle bodies which will need spaced / adapted to suit.
£300 for the lot please (£50 if you require pallet delivery).
RX7 GEARBOX
Not a lot to say really... comes with selector add bellhousing (not shown).
£125 please (£25 for delivery).
[Edited on 15/2/12 by scootz]
[Edited on 15/2/12 by scootz]
It's Evolution Baby!
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
welderman
|
posted on 15/2/12 at 05:03 PM |
|
|
Back to your old tricks mate. Good luck with the sale
Thank's, Joe
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|
scootz
|
posted on 15/2/12 at 05:10 PM |
|
|
Are you suggesting that I have previous for stripping down perfectly good cars and selling up for buttons when I get bored?
If you are... then you're absolutely right!
It's Evolution Baby!
|
|
stuart collins
|
posted on 15/2/12 at 05:42 PM |
|
|
U2u sent.
|
|
computid
|
posted on 15/2/12 at 06:49 PM |
|
|
I may well be interested in the chassis when I start my new job, do you have a ball park figure of what you'd be looking for?
|
|
pewe
|
posted on 15/2/12 at 06:54 PM |
|
|
This may be helpful Scootz F27 for sale
Cheers, Pewe10
|
|
scootz
|
posted on 15/2/12 at 06:54 PM |
|
|
Thank you for all the U2U's folks... I have accepted an offer on the chassis package, so it is provisionally sold.
It's Evolution Baby!
|
|
scootz
|
posted on 15/2/12 at 06:58 PM |
|
|
quote: Originally posted by pewe
This may be helpful Scootz F27 for sale
Cheers, Pewe10
My mum says I'm speshul... and that I'm not allowed to eat blue smarties!
It's Evolution Baby!
|
|
Dangle_kt
|
posted on 15/2/12 at 07:50 PM |
|
|
great project! good luck on a stress free and speedy sale scootz
|
|
clairetoo
|
posted on 15/2/12 at 08:15 PM |
|
|
Dont suppose you would sell the Rx7 bell housing without the gearbox would you ? Only I've been asked a few times if I could do an adapter for
fitting the Mazda V6 to an Rx7 and need one to measure/prototype .
Its cuz I is blond , innit
Claire xx
Will weld for food......
|
|
scootz
|
posted on 15/2/12 at 08:18 PM |
|
|
Could do Claire... no idea about what it's worth, so feel free to fire away an offer. Should only cost 7 or 8 to post out.
It's Evolution Baby!
|
|
clairetoo
|
posted on 15/2/12 at 08:30 PM |
|
|
Do you know what year/model the `box is from ? I've just been checking old emails , and the last inquiry mentioned third generation/ FD
...................
I'll bung him a mail to get what information I can .
Its cuz I is blond , innit
Claire xx
Will weld for food......
|
|
scootz
|
posted on 15/2/12 at 08:40 PM |
|
|
It's the FC 3S Claire.
It's Evolution Baby!
|
|