grassracer
|
posted on 27/6/12 at 03:56 PM |
|
|
Sierra Diff Wanted
Wanted 7in Sierra open diff to suit bolt on 100mm shafts....cash waiting
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
|
SALAD
|
posted on 27/6/12 at 05:33 PM |
|
|
You are probably aware but just in case.......Unless someone has an adapted Open diff the bolt on (Lobro) shafts won't go on. LSD's take
the Lobro shafts and the Open diffs use push in Tripod shafts.
|
|
AdrianH
|
posted on 27/6/12 at 05:36 PM |
|
|
There are some 7 inch open with lobro shafts, some later models did have a disk set-up hence from time to time you see these on ebay.:
eBay Item
Adrian
Why do I have to make the tools to finish the job? More time then money.
|
|
SALAD
|
posted on 27/6/12 at 05:39 PM |
|
|
Ah ha, that is what I have learnt today
|
|
grassracer
|
posted on 27/6/12 at 06:11 PM |
|
|
Yes indeed...some do some don't. I'd seen that one on the bay but it pains me to pay so much for one when they could be had for £30 or £40
not too long ago
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
ReMan
|
posted on 27/6/12 at 08:59 PM |
|
|
I have one of those.........
I'd like a bit more than £40 for it, especially as it was given to me to replace an LSD I lent a mate.
Unfortunatly he got sold it as LSD, it's not!
I have the backplate off and the splines unclipped.
More unfortunatly I was staying at Hawkshead a fortnight ago!
Might be back up North in a Fortnight again, looking for our next holiday now. Is your garage empty?
www.plusnine.co.uk
|
|
wilkingj
|
posted on 27/6/12 at 11:07 PM |
|
|
You dont say what ratio you are looking for?
Prices are getting silly. Especially for the 3.14 and even the 3.38 diffs.
1. The point of a journey is not to arrive.
2. Never take life seriously. Nobody gets out alive anyway.
Best Regards
Geoff
http://www.v8viento.co.uk
|
|
skidude88
|
posted on 29/6/12 at 05:46 PM |
|
|
30-40 quid not too long ago!!??
I paid a ton for a 3.62 about 5 years ago and that seemed to be the going rate back then!
Early MK de-Dion CBR1000 FJ-FP.
|
|
charlie_pank
|
posted on 9/7/12 at 07:00 PM |
|
|
I've got a 3.14 viscous for sale, interested?
|
|