Blackbird Rush
|
| posted on 30/8/12 at 06:00 PM |
|
|
Monitor died
Hi All
I have a samsung syncmaster 226CW used as a 2nd monitor on my laptop, all of a sudden its just died no warning just went blank and no life at all
???
Had a google and thought it may be the PSU capacitors they look OK i.e. no bulging.
Any ideas or bin it, had it a couple of years and it was 2nd hand when i got it.
Ta for any help.
Ash
|
|
|
|
|
bi22le
|
| posted on 30/8/12 at 06:52 PM |
|
|
Fuse in the plug?
Dont laugh, we have all jumped in at the deep end and expected the worse for no reason!!!
Track days ARE the best thing since sliced bread, until I get a supercharger that is!
Please read my ring story:
http://www.locostbuilders.co.uk/forum/13/viewthread.php?tid=139152&page=1
Me doing a sub 56sec lap around Brands Indy. I need a geo set up! http://www.youtube.com/watch?v=EHksfvIGB3I
|
|
|
balidey
|
| posted on 30/8/12 at 07:20 PM |
|
|
or kicked the VGA cable out the back of the PC
Dutch bears have terrible skin due to their clogged paws
|
|
|
gremlin1234
|
| posted on 30/8/12 at 09:48 PM |
|
|
probably will be the psu capacitors,
but also maybe the back-light, is there any trace of an image, (use a very bright torch to look)
does the power light come on at all?
|
|
|
Blackbird Rush
|
| posted on 30/8/12 at 10:26 PM |
|
|
Hi
Have tried a different lead i know works...... nothing
There is no life whatsoever no power on lights etc....
maybe try and get hold of some replacement caps then (nothing to loose!)
Ash.
|
|
|
Surrey Dave
|
| posted on 31/8/12 at 07:29 AM |
|
|
Worth a go
I've been lucky with a monitor and a Samsung 37" tv changing capicitors, so may be worth a go , ebay is an easy place to get the parts.
Sometimes kits are listed for a particular monitor (usually Samsung)
|
|
|
Blackbird Rush
|
| posted on 1/10/12 at 06:49 PM |
|
|
Getting round to fixing this , popped by maplin to get some caps , they didn't have an 820 mf cap only a 1000 mf one.
How important with caps is it to get an identical one?
Ash
|
|
|
gremlin1234
|
| posted on 1/10/12 at 07:08 PM |
|
|
best to try and get the same rating, and certainly the same construction. - only replace electrolytics with new electrolytics
though generally +100% / -50% might/should work.
the voltage rating however must not be less than you currently have, but it would be fine to replace 16v rated ones with anything above (say
25v ) though higher voltage ones tend to be larger.
|
|
|
