pigiron
|
| posted on 6/2/13 at 10:47 PM |
|
|
Silvertop head on blacktop poss?
Is it possible to fit a 2.0 Zetec silvertop head on a 2.0 blacktop block?
|
|
|
|
|
austin man
|
| posted on 6/2/13 at 10:53 PM |
|
|
what are you hoping to gain from this
Life is like a bowl of fruit, funny how all the weird looking ones are left alone
|
|
|
pigiron
|
| posted on 6/2/13 at 11:09 PM |
|
|
I have a hydraulic big ported and valve head with Newman PH4 cams and a worn out bottom end. There are new blacktop short motors available at silly
money, it would make sense if I could marry the two.
Ha, just noticed what I have written above, yes my own bottom end could do with a rebuild aswell.
|
|
|
coozer
|
| posted on 6/2/13 at 11:18 PM |
|
|
Nope, creates problems with the cam belt.
No point when you can pick up engines for next to nowt.
1972 V8 Jago
1980 Z750
|
|
|
usher179
|
| posted on 6/2/13 at 11:28 PM |
|
|
the silvertop and blacktop head and block can't be fitted to each other with out work, as said in a previous post it creates problems with the
cam belts routing arount the water pump......the only way round i have tried it is the blacktop head with solid lifters fitted to the silvertop bottom
end.
http://www.ushermotorsport.co.uk.
|
|
|
pigiron
|
| posted on 7/2/13 at 08:47 AM |
|
|
Many thanks, good info.
|
|
|
.jpg)
