Blackhole
|
posted on 5/6/13 at 02:13 PM |
|
|
LHD Zetec Haynes Roadster
Hey, guys!
I'm in process of planning a build. This is how a see it right now:
- Haynes Roadster chassis (stiil looking for a final plan of an LHD one)
- Silvertop Zetec 1.8 on bike carbs + Megasquirt/jolt
- MT75 gearbox
- Black finish =))
Right now I'm looking for a final design for an LHD chassis to fit a Zetec and MT75 gearbox, and I need as much clearance under the engine as
possible, cause the roads here are just terrible.
So if anybody has some drawings I could transfer into SolidWorks I'd be extremely thankful =)
|
|
|
Myke 2463
|
posted on 5/6/13 at 02:45 PM |
|
|
This might help and welcome. Check http://www.haynes.co.uk/forums/index.php
http://vouchtroadster.blogspot.se/ or this http://locost.lt/viewtopic.php?f=2&t=14
Good Luck.
Be Lucky Mike.
|
|
snapper
|
posted on 5/6/13 at 03:18 PM |
|
|
I think a steel CVH sump fits, this you can shorten for more clearance
Also 15" wheels will give a little more height
I eat to survive
I drink to forget
I breath to pi55 my ex wife off (and now my ex partner)
|
|
Blackhole
|
posted on 5/6/13 at 03:32 PM |
|
|
Myke 2463
Thanks for those links, I've already found lots of interesting stuff there =)
snapper
I've done some research on the sumps and I'll definitely need to shorten one (or find somebody to shorten it for me, but I hope I'll
get my welding skills good enough till then =) Just wanted to find if there are anything I might do with the chassis to help
|
|
Blackhole
|
posted on 6/6/13 at 12:04 PM |
|
|
Found this picture in some Lithuanian build, why did he have to cut a piece out, I don't think that will be good for chassis integrity
![](https://lh4.googleusercontent.com/-9wC28s80QFU/USn0hpgkolI/AAAAAAAADl4/eu3Qxy6Wrf8/w1024-h679-no/2010-04-25-180535.jpg)
|
|