Barkalarr
|
| posted on 13/9/13 at 07:45 PM |
|
|
What Pinto Manifold For an Indy?
What manifold would you need to make the exhaust exit on a 2.0 pinto engined Indy beneath the bonnet line instead of out the side of the bonnet?
This is not my car in the picture, however it demonstrates exactly what I'm trying to overcome.
Ideally, I want to change the manifold to make the exhaust exit through the side panel.
Any ideas?
.jpg)
|
|
|
|
|
Daddylonglegs
|
| posted on 13/9/13 at 07:59 PM |
|
|
I'm running a Pinto with the standard 300cwt cast manifold. I've got a 2-into-1 from there down to the can, and it exits a few inches
above the lower rail. I should have some pics in my archive if it's any help.
It looks like the Midget is winning at the moment......
|
|
|
nick205
|
| posted on 13/9/13 at 09:51 PM |
|
|
Personally I like the MK over the side manifold arrangement. It gets the pipes and heat out of the engine bay as quickly as possible a d keeps it
away from the alternator and steering column.
|
|
|
jacko
|
| posted on 14/9/13 at 12:05 PM |
|
|
 
Rescued attachment 01 belhousing bolts.JPG
If i remember right Mr whippy was / is selling the manifold in the photo try a u2u to him
Jacko
|
|
|
rucksak
|
| posted on 14/9/13 at 06:02 PM |
|
|
Hi, i picked up some bits today and i have a 2.0 pinto manifold that goes down and come out the side, 4 branch version, it was originally fitted on a
Tiger, i am looking for a manifold like yours to fit my narrow body locost with a 2.0 pinto if anyone can help.
[Edited on 14/9/13 by rucksak]
|
|
|
Barkalarr
|
| posted on 14/9/13 at 06:09 PM |
|
|
I'll swap you !
|
|
|
rucksak
|
| posted on 14/9/13 at 06:35 PM |
|
|
Yeah could do a swap, however i live in devon and your in essex, shame as i was in harlow this morning.
|
|
|
Barkalarr
|
| posted on 14/9/13 at 06:39 PM |
|
|
quote:
Originally posted by rucksak
Yeah could do a swap, however i live in devon and your in essex, shame as i was in harlow this morning.
Never mind, my car's not here (yet) it comes early part of next week - it's currently in a transport depot and the first job is to change
the bonnet and manifold.
What car are you putting it in, I might have an Indy bonnet for you.
|
|
|
rucksak
|
| posted on 14/9/13 at 06:43 PM |
|
|
I got a narrow body locost, how could we get these manifolds swapped
|
|
|
Barkalarr
|
| posted on 14/9/13 at 06:47 PM |
|
|
Just stick em in the post - next day delivery is only about £10
|
|
|
rucksak
|
| posted on 14/9/13 at 06:51 PM |
|
|
Sounds good, let me have some pics and i will take pics of mine then when were happy we could send.
|
|
|
Barkalarr
|
| posted on 14/9/13 at 07:15 PM |
|
|
Sold ! - Photos to come towards the end of the week - I'll u2u my email.
|
|
|
rucksak
|
| posted on 14/9/13 at 07:22 PM |
|
|
O.K Great
|
|
|
