Jeffers_S13
|
| posted on 27/10/04 at 12:30 PM |
|
|
Custom exhaust anyone ?
Stumbled across this by accident today when I spent hours and hours looking for this sort of supplier a couple of weeks ago...typical.
http://www.milneroffroad.com/PIPE.HTM
|
|
|
|
|
mackie
|
| posted on 27/10/04 at 12:39 PM |
|
|
Excellent link, should come in handy!
|
|
|
Ben_Copeland
|
| posted on 27/10/04 at 04:59 PM |
|
|
Nice one
Ben
Locost Map on Google Maps
Z20LET Astra Turbo, into a Haynes
Roadster
Enter Your Details Here
http://www.facebook.com/EquinoxProducts for all your bodywork needs!
|
|
|
chrisg
|
| posted on 27/10/04 at 07:08 PM |
|
|
Of course MK do much more and are cheaper!
Cheers
Chris
Note to all: I really don't know when to leave well alone. I tried to get clever with the mods, then when they gave me a lifeline to see the
error of my ways, I tried to incite more trouble via u2u. So now I'm banned, never to return again. They should have done it years ago!
|
|
|
Ben_Copeland
|
| posted on 27/10/04 at 07:10 PM |
|
|
I'll take the website off my favourites then, if thats the case
Ben
Locost Map on Google Maps
Z20LET Astra Turbo, into a Haynes
Roadster
Enter Your Details Here
http://www.facebook.com/EquinoxProducts for all your bodywork needs!
|
|
|
Jeffers_S13
|
| posted on 28/10/04 at 10:02 AM |
|
|
quote:
Originally posted by chrisg
Of course MK do much more and are cheaper!
Cheers
Chris
Aha, I didnt realise, just looked at website.
They can do bends but not sure about end caps and perforated tube ?
Im considering making the actual can, a replica of the SBD one. 3" inlet and outlets and 7" diameter, cheapest quote Ive had is £250+VAT
for a very similar one. The parts to make one will cost around £100.
Only thing I dont like are the flat end caps, I want domed ones.
Any suggestions ?
Was trying to think of household/stroke everyday items that I could get cheap and cut up. Best thing I saw were some dirt cheap Balti dishes I saw in
a pound shop ! not sure what diameter they are.
Thanks
James
|
|
|
Peteff
|
| posted on 28/10/04 at 11:08 AM |
|
|
Try the pet shop
Dog bowls available from chihuahua to labrador size as used by someone for petrol cap surround, probably Mr Lumby.
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
|
Jeffers_S13
|
| posted on 28/10/04 at 11:29 AM |
|
|
quote:
Originally posted by Peteff
Dog bowls available from chihuahua to labrador size as used by someone for petrol cap surround, probably Mr Lumby.
Yeah they were also on my list of things to look at ! I found some 6.75" diameter balti dishes online now, be ideal to go inside a nominal
7" diameter can.
Thanks
James
|
|
|
ChrisW
|
| posted on 28/10/04 at 10:20 PM |
|
|
Didn't know MK did exhaust bits - been meaning to order a load for ages so I guess I'll give Martin a call.
Chris
My gaff my rules
|
|
|
