snapper
|
| posted on 2/2/15 at 02:38 PM |
|
|
Sensor plug
What connector do I need for this sensor?
I eat to survive
I drink to forget
I breath to pi55 my ex wife off (and now my ex partner)
|
|
|
|
|
Slimy38
|
| posted on 2/2/15 at 02:59 PM |
|
|
One of these?
Bog standard spade connector, just need to measure the width to choose the right one.
|
|
|
JMW
|
| posted on 2/2/15 at 03:12 PM |
|
|
But the sensor doesn't have a male spade fitting to fit the yellow (or red, or blue) female connector, it is a button type fitting in this case.
|
|
|
JMW
|
| posted on 2/2/15 at 03:15 PM |
|
|
Sorry, was I too quick? Can spade connectors work with these button types? I've always wanted to know how to connect to sensors with these
buttons.
|
|
|
CosKev3
|
| posted on 2/2/15 at 03:35 PM |
|
|
Yeah you just slide it on from the side! 
|
|
|
Slimy38
|
| posted on 2/2/15 at 03:43 PM |
|
|
quote:
Originally posted by CosKev3
Yeah you just slide it on from the side!
Yep, what he said!! There are specific ones that have an extra spring to hold it tighter, like this;
But the few times I've seen those type of 'nail head' connectors they've just been used with standard blade connectors as OEM
fit.
|
|
|
JMW
|
| posted on 2/2/15 at 03:47 PM |
|
|
This forum is so good.
|
|
|
snapper
|
| posted on 2/2/15 at 07:42 PM |
|
|
Thanks guys
I can bodge a spade to fit or look for the proper one
I eat to survive
I drink to forget
I breath to pi55 my ex wife off (and now my ex partner)
|
|
|
motorcycle_mayhem
|
| posted on 2/2/15 at 09:14 PM |
|
|
A normal spade like the one pictured will be fine, no mods.
I have one slid thus on the engine oil tank on the F397. It sits on that vibey animal and provides a signal OK.
|
|
|
Chris_Xtreme
|
| posted on 3/2/15 at 08:55 AM |
|
|
I used a normal spade connector too, worked fine.
|
|
|
