Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: rear hub,s
andybod

posted on 26/11/04 at 05:22 PM Reply With Quote
rear hub,s

does anybody have any picture,s of velocity rear hub carrier,s for disc brake,s mine are for drum,s and my axle has disc,s so woundering if it,s possible to convert hub carrier,s to mount disc,s and caliper,s thank,s
View User's Profile E-Mail User View All Posts By User U2U Member
tom_loughlin

posted on 26/11/04 at 05:37 PM Reply With Quote
you can get a bracket thing that sits behing each hub carrier, or alternatively, i have a couple of ones from a 2l sierra that i havent used, as i ussed the bracket things instead.
heres a pic of the bracket thing.
hope this is what your looking for.
prob got the wrong end of the stick though
tom Rescued attachment Image039.jpg
Rescued attachment Image039.jpg

View User's Profile E-Mail User View All Posts By User U2U Member
andybod

posted on 26/11/04 at 05:42 PM Reply With Quote
ta is that the caliper and mounting bracket and hub carrier of the sierra havn,t stripped mine to have a look yet need to get the hub nut,s undone and at the minute i don,t want to buy the luego rear hub carriers if i can use the one,s i have
View User's Profile E-Mail User View All Posts By User U2U Member
tom_loughlin

posted on 26/11/04 at 05:55 PM Reply With Quote
yeah, the item on the felt is the bracket for mounting the callipper (darren from GTS supplied it) and the thing on the right is the standard hub bearing off a 1.8 sierra.
i couldnt get my callippers to line up with the brake disc using the standard 2L sierra brackets for some reason, so decided to use darrens bracket.
also, a useful tip (if its not already too late):
undo the hub nuts before jacking the car up (i made this mistake) and had to take the driveshafts to my local garage to undo them
tom

View User's Profile E-Mail User View All Posts By User U2U Member
andybod

posted on 26/11/04 at 06:01 PM Reply With Quote
can i be cheeky and ask how much you paid for them and do you have a contact number/website for gts
View User's Profile E-Mail User View All Posts By User U2U Member
tom_loughlin

posted on 26/11/04 at 06:13 PM Reply With Quote
i got them as part of my kit:
here is the link:GTS
all the best,
tom

just found them on the site:
go to:
transmission
de-dion axle, and they are £8.50 each.


[Edited on 26/11/04 by tom_loughlin]

View User's Profile E-Mail User View All Posts By User U2U Member
andybod

posted on 26/11/04 at 06:57 PM Reply With Quote
great thanks for your help mate
View User's Profile E-Mail User View All Posts By User U2U Member
tks

posted on 3/12/04 at 02:05 PM Reply With Quote
maybe late...

I don't know what kind of hub i have but its huge,

but i can fit disc brakes on it and drums as well, i don't see wy you need a extra part?

Will make a pic anyway..

TKS

View User's Profile View All Posts By User U2U Member
andybod

posted on 3/12/04 at 02:38 PM Reply With Quote
picture would be appreciated i,ve ordered the carrier caliper,s as shown above but don,t think i,ll need them as i,ve stripped the rear axle and caliper mount,s direct to hub just not sure what the difference is on luego.s upright,s or am i just reading the build manual wrong
View User's Profile E-Mail User View All Posts By User U2U Member
wilkingj

posted on 3/12/04 at 06:33 PM Reply With Quote
Talk to Luego, and tell them you have the wrong ones... they will probably just swap them out for the ones you want.

Phone them up... they can only say no!

Or...

You can buy my Drum Back axle



[Edited on 3/12/2004 by wilkingj]





1. The point of a journey is not to arrive.
2. Never take life seriously. Nobody gets out alive anyway.

Best Regards
Geoff
http://www.v8viento.co.uk

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
r3nuf

posted on 3/12/04 at 09:09 PM Reply With Quote
Have a look in my photo archive, i have just uploaded a photo of my rear hub carrier complete with Sierra Hub and Caliper bracket. (Sorry about the size of the pic). This is the standard Luego Disc brake hub carrier.

Only thing missing is the actual caliper.

Hope this might help.

Cheers

Gary





Drive Fast....Brake Late....Take Chances

View User's Profile View All Posts By User U2U Member
tks

posted on 3/12/04 at 11:59 PM Reply With Quote
uhhhM????

i don't know if i do it the right way but i have swapped the hubs left and right if i compare it with your installing....

In many cars the rear brakes are mounted @ the rear side of the car (facing forwards)..

yours are facing backwards...

dunno whats the good way to go.

do you also have a problem with fitting the kalibers (hand brake???) i'm gonna mount it with the handbrake above and the oil entrance @ the botton don't know if its 100% good any one ideas??

Just saw its no problem, in my pics section i found how it was orriginal @ the sierra cosworth (the kalibers where there top mounted anyway..)

TKS

[Edited on 4/12/04 by tks]

View User's Profile View All Posts By User U2U Member
wilkingj

posted on 4/12/04 at 09:03 PM Reply With Quote
quote:
Originally posted by wilkingj
Talk to Luego, and tell them you have the wrong ones... they will probably just swap them out for the ones you want.



Ahh... Hmmmm Eats humble Pie after a diet of Mince Pies (today)....

You are a different Andy to who I thought you were... Please ignore my Ramblings... (most people do anyway!)



[Edited on 3/12/2004 by wilkingj]






1. The point of a journey is not to arrive.
2. Never take life seriously. Nobody gets out alive anyway.

Best Regards
Geoff
http://www.v8viento.co.uk

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.