andrew_s
|
| posted on 21/9/15 at 01:23 PM |
|
|
IVA Steering Wheel
I currently have an OMP steering wheel on a quick release boss
I made a crash pad, but it doesn't look very good
Any recommendation for a steering wheel and crash pad that will fit the qr boss. I have blocked the QR boss from working.
Any advise greatly appreciated - test is next week, and the nerves are setting in....
|
|
|
|
|
Slimy38
|
| posted on 21/9/15 at 01:49 PM |
|
|
I can't directly help, but I should mention that IVA isn't looking for 'looks good'... If it's secure and would do the
job then you should be fine. So what if it accidentally falls off after IVA?
|
|
|
theduck
|
| posted on 21/9/15 at 02:44 PM |
|
|
This passed as it is
|
|
|
andrew_s
|
| posted on 21/9/15 at 02:47 PM |
|
|
will take a pic tonight - when did that pass ?
I have the horn push but that's it (I could cover the horn icon as its not the horn)
|
|
|
907
|
| posted on 21/9/15 at 04:43 PM |
|
|
I have a Momo Race, and Dennis at Norwich was only concerned that it would collapse if I were to hit it.
It's fitted to a Vauxhall Nova column and once he had groped the expanded metal bit within the scuttle he was happy. 
Paul G
 
Will it pass IVA ?
[Edited on 21/9/15 by 907]
|
|
|
theduck
|
| posted on 21/9/15 at 04:45 PM |
|
|
quote:
Originally posted by andrew_s
will take a pic tonight - when did that pass ?
I have the horn push but that's it (I could cover the horn icon as its not the horn)
May at Kidderminster.
|
|
|
micksalt
|
| posted on 22/9/15 at 07:54 AM |
|
|
I purchased one of the Racetech steering wheel padding (Suede) for 265 - 270mm steering wheel for my steering wheel but it
was the wrong shape. I'll happily drop it in the post for you and you can give it a go.
|
|
|
andrew_s
|
| posted on 24/9/15 at 06:50 PM |
|
|
quote:
Originally posted by micksalt
I purchased one of the Racetech steering wheel padding (Suede) for 265 - 270mm steering wheel for my steering wheel but it
was the wrong shape. I'll happily drop it in the post for you and you can give it a go.
U2U sent thank you
|
|
|
andrew_s
|
| posted on 26/9/15 at 11:45 AM |
|
|
huge thanks to mick for the crash pad, not sure its big enough however, so:-
I have the crash pad
the pad I made (which is not that good looking)
or I could go with an option like micks of using neoprene
or the horn push
here's a link to some photos
link
what do people think? I just don't know what to do for the best on this point
the small pad will cover the screws that will disable the quick release so that something, and I can double sided sticky tape it on
the pad I made (the bigger one) has the screws to disable the quick release in it
thanks in advance
|
|
|
