Trev Borg
|
| posted on 17/10/15 at 06:50 PM |
|
|
1 Litre swirl pot
Any have one sitting around.
Went to plumb in the fuel today, and the 2 litre pot fouls justb about everything.
A nice short pot would be good.
Before you judge a man, walk a mile in his shoes.
By that time, who cares.
You're a mile away, and you've got his shoes
|
|
|
|
|
furryeggs
|
| posted on 17/10/15 at 07:16 PM |
|
|
I have one that holds 600ml, I was sold it off ebay saying it was a 1ltr.
|
|
|
Trev Borg
|
| posted on 17/10/15 at 07:34 PM |
|
|
Can you let me know the physical sise of it please?
Are the inlet outlets push on fitting or threaded?
How much ? 
Before you judge a man, walk a mile in his shoes.
By that time, who cares.
You're a mile away, and you've got his shoes
|
|
|
Trev Borg
|
| posted on 17/10/15 at 07:43 PM |
|
|
Just re-looked at my pot. Its only a 1 litre one DOHH. (actually 1.1 litres)
Its still too tall though @150mm
Before you judge a man, walk a mile in his shoes.
By that time, who cares.
You're a mile away, and you've got his shoes
|
|
|
furryeggs
|
| posted on 17/10/15 at 07:53 PM |
|
|
Aluminium, 8mm inlet/outlet 3 at top, 1 at bottom. its quit narrow but deep. It has a 4" mounting plate half way down on the left as you look at
the ports.
9" tall (230mm)
2.5" diameter (60mm)
Might be to tall, could fit down the side if you've got a gap.
|
|
|
