Dave Bailey
|
| posted on 6/2/16 at 01:02 PM |
|
|
Sytec fuel filter
I have picked up an unused sytec 50mm diameter fuel filter.. The main body Is blue with a red threaded cap. Anyone know what is the inlet end? I think
it is the red removable cap.... Also do they come with the paper or metal filter as standard?
Thanks
Dave B
|
|
|
|
|
paulc
|
| posted on 8/2/16 at 10:36 PM |
|
|
Pretty certain the inlet end is the threaded cap.
|
|
|
Dave Bailey
|
| posted on 9/2/16 at 07:20 AM |
|
|
Thanks... That is how I have installed it....
|
|
|
ElmrPhD
|
| posted on 14/2/16 at 07:21 AM |
|
|
I'm looking at these right now.
You have the bigger of the two options I've seen.
http://www.competitionsupplies.com/fuel-systems/fuel-filters/bullet-fuel-filter
Site says 8 micron paper filter is standard and 55 micron STEEL mesh is available.
Oddly, this site doesn't mention Sytec as the makers, but the pic they give shows that logo.
No numbers on flow rate or even how much hp it can support.
From what I can tell, the small "compact" billet filters allow up to 200 hp, So my VTEC motor will need the bigger (i.e. more expensive)
filters like the one you just got...
Good luck!
Steve
|
|
|
