Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: 2001 2.0 Zetec + Type 9 gearbox!!
Luego Sportscars Holland

posted on 1/1/05 at 04:03 PM Reply With Quote
2001 2.0 Zetec + Type 9 gearbox!!

Hello everybody,

Who knows the following:

If you want to use a 2001 2.0i 16v Zetec together with a type 9 gearbox and you want to use the standard 2.0 flywheel which friction disc, pressure plate and release bearing you need to get it all working??

Thanx.






View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
JoelP

posted on 1/1/05 at 04:35 PM Reply With Quote
this has been covered before i seem to recall. Not sure where, and zetecs arent something i know anything about. Try searching for zetec! should pull up some results.






View User's Profile View All Posts By User U2U Member
stevebubs

posted on 1/1/05 at 05:03 PM Reply With Quote
Not sure you can use the 2.0 flywheel - think you'll need to move to the 1.8 one (I have)

IIRC the plates you then need are from a 1.8 CVH Sierra, as is the starter.

Bought all my stuff from Dunnell - bit cheaper that Raceline et al.

HTH

View User's Profile E-Mail User View All Posts By User U2U Member
Mave

posted on 1/1/05 at 06:22 PM Reply With Quote
Michel,
I found this in my archive (thanks to www.zetec-cat.co.uk):
The standard 2.0 litre Zetec flywheel can be used however this is quite heavy. This will require a standard 2.0 Zetec clutch and a clutch release bearing from a 1971-88 Ford Transit 2.4/2.5 diesel (Quinton Hazell part CCT303)

I hope this helps.....

Cheers,
Marcel

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
fastenuff

posted on 1/1/05 at 11:14 PM Reply With Quote
try these chris or dave's and read somewhere that the relaese bearing of a cpari could be used, there are 2 types 20 spline or 23 spline ( ford no. 6124271 and 6124270, did spend half an hour at ford looking at photofile sheets)





Ingmar

View User's Profile E-Mail User View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.