pekwah1
|
| posted on 30/5/17 at 01:55 PM |
|
|
Ford OBD2 port
Hi Guys,
I have a blacktop zetec in my car, but i forgot to take the OBD2 port out of the donor.
A quick trip to the breakers and i've stolen another one out of a different car, however have now noticed that this seems different to the guide
i've been using by big_wasa:
BIG_WASA:
My OBD2 port:
Now my first thought was just to move the pins i've got in my port and do it the same as the big_wasa guide, but wasn't expecting the
ports to be different between cars??
Anyone able to tell me what i should do here?
Thanks,
Andy
[Edited on 30/5/17 by pekwah1]
|
|
|
|
|
gremlin1234
|
| posted on 30/5/17 at 02:19 PM |
|
|
obd connections do vary between manufactures "Manufacturer discretion: "
this wiki page has some details, and pinouts
https://en.wikipedia.org/wiki/On-board_diagnostics
|
|
|
pekwah1
|
| posted on 30/5/17 at 02:25 PM |
|
|
These are both from Ford though.
One from a 2000 Mondeo, the other one i can't remember, either a fiesta or a focus or something like that....
|
|
|
gremlin1234
|
| posted on 30/5/17 at 03:20 PM |
|
|
the one you have, has the can bus connections (6&14)
|
|
|
big_wasa
|
| posted on 30/5/17 at 04:29 PM |
|
|
That picture of mine is just a generic pic of an obd2.
Just compare PIN numbers.
with can bus.
With out can bus.
|
|
|
big_wasa
|
| posted on 30/5/17 at 04:37 PM |
|
|
Yours is still differant. Just move the pins to match the pin out guide.
|
|
|
pekwah1
|
| posted on 30/5/17 at 05:09 PM |
|
|
thanks wasa, so just because i'm stupid, i'm guessing a 2000 2.0 blacktop from a mondeo wouldn't have canbus...?
|
|
|
big_wasa
|
| posted on 31/5/17 at 10:48 AM |
|
|
No.
|
|
|
