the_big_1
|
| posted on 25/6/17 at 08:30 PM |
|
|
Rear Hubs Mounting Rotation
Hi All,
Just getting all the parts to build up the rear hubs.
From what I have read, the front plate has the holes horizantal for drum, vertical for disc? Or have you guys done something different?
Cheers!
|
|
|
|
|
Charlie C
|
| posted on 26/6/17 at 07:19 AM |
|
|
Hi
My rear disc hubs are at 45degress pointing to the rear and upwards.
Charlie
|
|
|
the_big_1
|
| posted on 26/6/17 at 12:00 PM |
|
|
Cheers, so say at 2 o'clock position?
|
|
|
Charlie C
|
| posted on 26/6/17 at 01:19 PM |
|
|
hi
Have a look and this Haynes Forum post
I purchased mine ready built so I'm not sure of the exact rotation, the advice on the Haynes post is to mock it up with the calliper and
remember to make sure the handbrake cable have clearance.
|
|
|
the_big_1
|
| posted on 30/6/17 at 07:39 PM |
|
|
Hi Guys,
What do you think?
Roated to 45 degrees, tem handbrake cable doesnt fowl anything etc.
[img] [/img]
[img] [/img]
|
|
|
the_big_1
|
| posted on 1/7/17 at 09:18 AM |
|
|
Hi guys,
What do you think before I start fully welding the hubs?
Many thanks.
|
|
|
