Paul TVR
|
| posted on 8/5/19 at 09:41 PM |
|
|
IVA failed
Minor fail on my GBS, few points picked up.
Fuel pipes insecure, over rear diff, couple of brackets made now.
Rear brake line could hit the driveshaft, added a p clip.
Light switch edge radius didn't conform, new one printed
Headlights don't meet the 45 degree visibility, printed a spacer.
Indicators only 320mm not the 350mm needed.
Dash bottom radius does not conform, was bought from kit car direct so a bit annoyed at that one, need a solution before I can book the retest.
|
|
|
|
|
loggyboy
|
| posted on 9/5/19 at 12:25 AM |
|
|
Good fail with some fairly easy fixes.
What dash panel was it?
|
|
|
Paul TVR
|
| posted on 9/5/19 at 06:47 AM |
|
|
http://www.kitcardirect.co.uk/westfield-wide-body-dashboard-panel-carbon-fibre.html
That was the dash panel.
|
|
|
Daf
|
| posted on 9/5/19 at 08:14 AM |
|
|
quote:
Originally posted by Paul TVR
http://www.kitcardirect.co.uk/westfield-wide-body-dashboard-panel-carbon-fibre.html
That was the dash panel.
How far off the radius was the dash panel? I had a similar one and covered it with this:
https://www.ebay.co.uk/i/153335163393?chn=ps
then a layer of vinyl over the top, the added thickness gave me the radius - it can all fall off after the IVA naturally!
|
|
|
CosKev3
|
| posted on 9/5/19 at 08:18 AM |
|
|
Dash just needs some edging trim?
TBF it doesn't state its IVA compliant in the advert,so really its down to you for not checking before the test.
|
|
|
40inches
|
| posted on 9/5/19 at 08:49 AM |
|
|
quote:
Originally posted by CosKev3
Dash just needs some edging trim?
TBF it doesn't state its IVA compliant in the advert,so really its down to you for not checking before the test.
The IVA compliant one is This one
|
|
|
Paul TVR
|
| posted on 9/5/19 at 05:53 PM |
|
|
The guys at kitcardirect have been pretty decent, it did say IVA compliant when I bought it and they have said they will help sort out a solution for
me.
|
|
|
Paul TVR
|
| posted on 20/5/19 at 03:27 PM |
|
|
Now a pass
Passed the IVA this morning, the guys were very reasonable at Southampton and mostly happy with the mods I did to get it through, although had to cut
down the light switch.
Now have to fill out the registration forms, can they be submitted online to the DVLA or only via post?
|
|
|
mackei23b
|
| posted on 24/5/19 at 02:06 PM |
|
|
Hi there
Just going through the same process.....post only as some of the documents need to be originals
Remember to visit: https://www.gov.uk/vehicle-registration/kitbuilt-vehicles as I did not include a V627/1....error on my part as I just looked at the
guidance for new vehicles as I had a certificate of newness.
Cheers
Ian
|
|
|
gremlin1234
|
| posted on 24/5/19 at 02:38 PM |
|
|
quote:
Just going through the same process.....post only as some of the documents need to be originals
make copies before you send them, they don't return them all.
|
|
|
Paul TVR
|
| posted on 30/5/19 at 10:43 PM |
|
|
Got my approval today with the numberplate certificate.
Should be on the road by the weekend!
|
|
|
rusty nuts
|
| posted on 31/5/19 at 05:42 AM |
|
|
Just in time for summer
|
|
|
adithorp
|
| posted on 31/5/19 at 06:47 AM |
|
|
Nice one. Be careful out there.
"A witty saying proves nothing" Voltaire
http://jpsc.org.uk/forum/
|
|
|
pewe
|
| posted on 31/5/19 at 02:42 PM |
|
|
quote:
Originally posted by adithorp
Nice one. Be careful out there.
Second that - other road users seem to be oblivious to low profile, rapid motors - almost as a bad as riding a bike!
Enjoy - weather's looking good...
Cheers, Pewe10 
|
|
|
.jpg){kind=avatar}
.jpg)
