kev R1
|
 posted on 16/11/05 at 08:04 PM |
|
|
DURITE INDICATOR SWITCHES
Can anyone help me out on this wiring diagram for my indicator switch, this wiring diagram is the one supplied with the switch and doesn't seem
very helpful to me!
 
Rescued attachment durite indicator switch.JPG
|
|
|
|
|
rayward
|
| posted on 16/11/05 at 08:21 PM |
|
|
looks a bit odd, but i would say,
1 and 3 go to each side indicator circuits, and 2b is the feed from the flasher relay
7,8,9,10 not used
HTH
Ray
|
|
|
kev R1
|
| posted on 16/11/05 at 08:23 PM |
|
|
yeah thats what i was thinking dont know why it shows the outer ones like that,
cheers
|
|
|
k33ts
|
 posted on 16/11/05 at 08:29 PM |
|
|
you will only use 3,1 and 2b,
2b will be your supply from flasher relay.
3 and 1 to left and right indicators.
duno what the rest is bit of a naff diagram.
|
|
|
Chippy
|
| posted on 17/11/05 at 12:48 AM |
|
|
Never come across this switch, one thing I would ask, does it have warning lamps built in, and if so are these the 7,8,9, and 10 connections, if so
you would need to connect 1, and 3, through them. May be totaly wrong but worth a check. ATB
|
|
|
Martin van der Wal
|
| posted on 17/11/05 at 05:54 AM |
|
|
Connect 1 to 10 and 3 to 9 , 7+8 to ground and the lights in the switch are flashing , when the switch is activated.
|
|
|
