esn163
|
| posted on 3/12/05 at 08:39 PM |
|
|
Indy Handbrake cable routing
Hi,
We are just in the process of fitting the handbrake cable to our Indy but are unsure of the routing and whether any brackets etc need to be made to
route it down to the drums safely. Has anyone got any photos that show the handbrake cable on the car?
Thanks
Ed
|
|
|
|
|
tri
|
| posted on 3/12/05 at 08:52 PM |
|
|
Picture on my archive that may help.
Tri
|
|
|
zxrlocost
|
| posted on 3/12/05 at 09:11 PM |
|
|
hi mate you do know the handbrake doesnt fit as it is dont you ?
ta chris
|
PLEASE NOTE: This user is a trader who has not signed up for the LocostBuilders registration scheme. If this post is advertising a commercial product or service, please report it by clicking here.
|
esn163
|
| posted on 3/12/05 at 09:16 PM |
|
|
Thanks Tri and Chris,
quote:
Originally posted by zxrlocost
hi mate you do know the handbrake doesnt fit as it is dont you ?
ta chris
yeh already removed one end. Was just unsure about brackets etc and the best way to run it
thanks
Ed
[Edited on 3/12/05 by esn163]
|
|
|
Genesis
|
| posted on 4/12/05 at 01:44 PM |
|
|
Lots of pictures on Hellfire's Website...
E-CLICK
|
|
|
DarrenW
|
| posted on 6/12/05 at 12:24 PM |
|
|
Just a word of warning. I failed SVA after using U-saddles for connecting the cables atr the lever end. Only acceptable method at Gosforth is
commercially crimped ends.
Many people have passed elsewhere using u saddles and solder on nipples (silver solder), but some centres are now warning against these (U saddles in
particular).
|
|
|
mike smith1
|
| posted on 6/12/05 at 01:23 PM |
|
|
Few pic's in my photo archive show how we routed ours, look at the ones called fuel tank and drum, you can see on the fuel tank one we p-clipped
the cable to the top rail, saw this on a car at MK i believe thats how they do all there cars.
Did we speak to you saturday at MK??
Cheers Mike
|
|
|
esn163
|
| posted on 6/12/05 at 04:56 PM |
|
|
Yes we were at MK on saturday. Thanks for all the pictures everyone. Don't know how I missed those on Hellfire's site I had actually
already looked there first.
Thanks
Ed
|
|
|
Hawkeye
|
| posted on 8/12/05 at 08:40 PM |
|
|
Indy Handbrake Cable Routing
Have been pondering over exactly this same problem myself.
Using standard Sierra handbrake cables, inner needs shortening but outers seem too short to get easy bends to drums.
Photos offered from other builders don't quite show best route. Can anyone out there offer more advice?
|
|
|
.JPG)
