Barry
|
| posted on 29/3/06 at 08:32 PM |
|
|
Too many bits in my sump gasket set
I'm putting the sump back onto my Pinto but there seems to be too many bits in the gasket kit - which was bought from Ford.
The bits in question are two small wedge shaped pieces and two rubber washers shaped like flattened cones.
I'd really appreciate any advice and suggestions "where to put these bits".
I don't remember taking anything like them off or even anything like them falling off when I removed something else.
Thanks
Barry
|
|
|
|
|
stevec
|
| posted on 29/3/06 at 09:59 PM |
|
|
I think the wedges go in the rear main when it is fitted.
Steve
|
|
|
liam.mccaffrey
|
| posted on 29/3/06 at 10:24 PM |
|
|
hey barry I've just moved away from cardiff after six years where abouts are you?
sorry can't elp with the pinto though vauxhall man meself
Build Blog
Build Photo Album
|
|
|
Barry
|
| posted on 29/3/06 at 10:58 PM |
|
|
Hi Steve - thanks for the advice. I'll check that.
and Liam - I'm in Radyr which is now physicaly joined to Cardiff so it counts as the same.
Barry
|
|
|
liam.mccaffrey
|
| posted on 29/3/06 at 11:20 PM |
|
|
i lived in maindy, roath and most of the time in whitchurch, back down west now after college
Build Blog
Build Photo Album
|
|
|
