shades
|
posted on 21/4/06 at 11:26 AM |
|
|
4age cylinder head bolts
Does anyone know where I can get a star socket that fits the cylinder head bolts on a 4age engine? I have tired all the local tool shops and they are
too fat and short.
it needs to be an E16, with a outside diameter of less than 18mm and a depth of greater than 38mm.
Any suggestions?
|
|
|
eddymcclements
|
posted on 21/4/06 at 11:32 AM |
|
|
I used a long 3/8" drive socket. The Halfords Professional series 3/8" long socket is a 12-point socket, just what you need.
All my other long sockets are hexagonal, and my regular sockets are 12-point, but too short.
Cheers,
Eddy
|
|
shades
|
posted on 21/4/06 at 11:41 AM |
|
|
thanks... wish I had asked the question earlier... just back from halfords empty handed. oh well
|
|
ChrisJLW
|
posted on 21/4/06 at 02:57 PM |
|
|
Yup it's a 10mm double hex long socket.
Buy 2 because they are not really designed for the amount of torque involved. I've split a couple in the last year or so.
[Edited on 21/4/06 by ChrisJLW]
I've lived a life that's full.
I've traveled each and ev'ry highway.
But more, much more than this,
I did it side-ah-ways.
|
|
shades
|
posted on 21/4/06 at 05:49 PM |
|
|
could'nt find one so have turned down a regular E16 torx bit. It has worked ok to get the bolts out. Wife away so head in dishwasher cleanin
up
|
|