athoirs
|
| posted on 1/6/06 at 01:17 PM |
|
|
Zx12r airbox
While still sorting out my exhaust manifold .. I have built a airbox for the engine..
I have a itg filter to go on but it is so close to the underside of the bonnet I dont think its going to get much air!
I know that Phil et al have been looking at building one themselves, but i thought I would have a go. On the front I will fit a plate which I can
change about the air supply. I am going to try a feed from the hood intake via a 3" feed first.. Not very scientific but I have a HP function on
the Veypor so I might be able to see if there is any difference ( I have a powercommander as well)
 
Rescued attachment P1010009.JPG
|
|
|
|
|
athoirs
|
| posted on 1/6/06 at 01:19 PM |
|
|
another view
 
Rescued attachment P1010010.JPG
|
|
|
athoirs
|
| posted on 1/6/06 at 01:21 PM |
|
|
Oh and one of the new flightdeck for good measure!
 
Rescued attachment P1010164.JPG
|
|
|
chris.russell
|
| posted on 1/6/06 at 04:13 PM |
|
|
looking good, much better than my cardboard and duck tape attempt!
 
Description
Mines a pint
|
|
|
athoirs
|
| posted on 1/6/06 at 06:32 PM |
|
|
but yours is bigger than mine !
I'll give it a try.. it didnt take more than a day to knock up
|
|
|
Smartripper
|
| posted on 1/6/06 at 06:44 PM |
|
|
Hello,
The one that chris has is more like the original design. because the size is better and i've you got a bonnet with scoop then it's going
to fit nice.
Daniel
|
|
|
