Schrodinger
|
| posted on 19/7/06 at 12:10 PM |
|
|
Chassis Dimensions
I have a copy of the Avon book but I understand that the drawings are not 100% acurate. Has anybody done a set of acurate drawings if so would they
share them?
|
|
|
|
|
balidey
|
| posted on 19/7/06 at 01:41 PM |
|
|
There are revised drawings on line somewhere, i will try and search as i have seen them recently. The 2nd edition of the book has less errors (i think
only one).
Basically, the dimenions that were wrong were half of what they should have been, dimenions were taken from the centreline but shown as a total width.
The basic dimensions were all correct.
|
|
|
t.j.
|
| posted on 28/7/06 at 09:29 PM |
|
|
quote:
Originally posted by Schrodinger
I have a copy of the Avon book but I understand that the drawings are not 100% acurate. Has anybody done a set of acurate drawings if so would they
share them?
The castor-angle in the drawings form the orange-book are not good (upper brackets). The 90 degr angle must be at the lower rail to gain 5 or more
degr castor.
|
|
|
