davrus
|
| posted on 1/11/06 at 07:55 PM |
|
|
acewell speedos
Hi ya , got aan acewell speedo on its way , can any one tell me where the best place to put the speedo sensor and any pics would be appreciated
Many thanks
Davrus
|
|
|
|
|
JackNco
|
| posted on 1/11/06 at 08:17 PM |
|
|
Just out of interest which one did u go for? every one seems to use the 31XX but ive got my eye on th 2853
Some people are worried about the difference between right and wrong. I'm worried about the difference between wrong and fun.
O'Rourke, P.J. (1989), Holidays in hell. London (Picador)
|
|
|
stevec
|
| posted on 1/11/06 at 08:31 PM |
|
|
I mounted mine on the O/S rear inner driveshaft joint and the cable part on the diff using a bracket off the Little torx bolt that adjusts the pinion
bearing.
Steve.
Cobblers just seen your pics,(live axle) sorry, Looks a propshaft fitting then.
[Edited on 1/11/06 by stevec]
[Edited on 1/11/06 by stevec]
|
|
|
Howlor
|
| posted on 1/11/06 at 09:43 PM |
|
|
Propshaft towards the front. Nice stable reading and cock on for the SVA.
|
|
|
nib1980
|
| posted on 2/11/06 at 07:50 AM |
|
|
Hi, Can I be cheeky and ask if you have any pictures, as i was condsidering this.
many thanks in advance
quote:
Originally posted by Howlor
Propshaft towards the front. Nice stable reading and cock on for the SVA.
|
|
|
Paul G
|
| posted on 2/11/06 at 10:01 AM |
|
|
apologies for the blurred pic but I put mine here with the magnet sikaflexed in one of the holes
http://moog-designs.co.uk/MK_Indy/pages/DSC00046.htm
|
|
|
andy_mullin
|
| posted on 2/11/06 at 01:30 PM |
|
|
I dont have anything at the moment.
I have a 1000 faser, and was looking for some clocks.
Is the Acewell any good with a BEC, I will only use the car for trackdays so I need a rev counter, oil pressure, water temp and a neutral light.
Cheers,
Andy
|
|
|
