Simon
|
posted on 22/8/03 at 12:23 PM |
|
|
Tube bending
Just found this and thought it may be of interest to peeps on here!
http://www.pipecraft.co.uk/
ATB
Simon
|
|
|
stephen_gusterson
|
posted on 22/8/03 at 11:01 PM |
|
|
interesting site, but way over the top special effects - would cripple a dial up!
atb
steve
|
|
spy
|
posted on 22/8/03 at 11:44 PM |
|
|
I've contacted them recently. They're quite expensive. They quoted me about £220 for a roll hoop with 4 bends.
The guy I spoke to said that a lot of the cost was due to the fact that he had to order a full length of tubing to do my design.
|
|
Alan B
|
posted on 23/8/03 at 12:35 AM |
|
|
quote: Originally posted by stephen_gusterson
interesting site, but way over the top special effects - would cripple a dial up!
atb
steve
Agreed.
I gave up after the first couple of pages.
Why do people do that? The first fancy site you see is cool.....but now I just want info. not a hollywood production......
Just another rant I guess....
|
|
kiwirex
|
posted on 23/8/03 at 08:45 AM |
|
|
Originally posted by stephen_gusterson
interesting site, but way over the top special effects - would cripple a dial up!
Ta for the warning
- Greg H
|
|
carcentric
|
posted on 24/8/03 at 08:11 PM |
|
|
Related posts on another forum I frequent
I found this interesting (and no graphics at all): http://btw-trikers.org/wwwboard/messages/2785.html
M D "Doc" Nugent
http://www.carcentric.com
|
|
Ian Pearson
|
posted on 29/8/03 at 04:46 PM |
|
|
Had a few bits from Pipecraft. Not cheap, but very well fabricated. Dealt with a guy called Andy Wood. Best contacted privately on his mobile during
lunch, as they are normally busy. See my post on manifolds.
|
|