Evrim
|
| posted on 11/8/07 at 12:01 PM |
|
|
Avon wishbone dim problem again
Hi ,I made a Jig (by using book dimensions)for front lower wishbone and try to locate the damper bracket but when i made measurements i realized that
it is different from the original ones that others builders uses as mentioned attached pic.Any help please.
 
Rescued attachment wish dim.JPG
|
|
|
|
|
Evrim
|
| posted on 11/8/07 at 12:23 PM |
|
|
let me send one of the sample picture taken from builder archive that i don't remember now who he is.
 
Rescued attachment pic07.jpg
|
|
|
Avoneer
|
| posted on 11/8/07 at 03:50 PM |
|
|
It doesn't really matter, but the closer you get them to the bottom ball joint, the better.
IIRC, Tiger are still supplying the wrong length front shocks with Avons and they rest on the bump stops when the bottom bone is level with the
ground.
Pat...
[Edited on 11/8/07 by Avoneer]
No trees were killed in the sending of this message.
However a large number of electrons were terribly inconvenienced.
|
|
|
t.j.
|
| posted on 11/8/07 at 10:14 PM |
|
|
This is how I made mine.
 
Description
My track will be around 147 with ET41.
I'm using 13 " Spax.
The Tiger drawings will provied turning in your coil-over, which I personal not like!
I want the coil-over movement in one straight line.
look also in my photo-archive if you want
[Edited on 11/8/07 by t.j.]
Please feel free to correct my bad English, i'm still learning. Your Dutch is awfull! :-)
|
|
|
Avoneer
|
| posted on 12/8/07 at 06:52 PM |
|
|
Those plates are very nicely welded TJ..
Pat...
No trees were killed in the sending of this message.
However a large number of electrons were terribly inconvenienced.
|
|
|
t.j.
|
| posted on 13/8/07 at 05:26 AM |
|
|
quote:
Originally posted by Avoneer
Those plates are very nicely welded TJ..
Pat...
 Thx, i'm still learning 
By the time car is finished i'll will be satisfied.
Please feel free to correct my bad English, i'm still learning. Your Dutch is awfull! :-)
|
|
|
%20(WinCE).JPG)
