Dougie T
|
posted on 5/1/08 at 09:46 AM |
|
|
Donor suspension
I am contemplating building my car with the 4x4 system of my donor car(xr4x4) and was wondering if anyone had any ideas about suspension, especialy in
the front where the front shafts go through, I could TRY to use the donor set up but it will be pretty clumsy i think...any ideas greatly appreciated
|
|
|
speedyxjs
|
posted on 5/1/08 at 10:13 AM |
|
|
Could be done. I am using the wishbones (front and rear) from my donor. The actual dampers/coilovers probably cant be used unless the weight of the
car is the same as your donor
How long can i resist the temptation to drop a V8 in?
|
|
James
|
posted on 5/1/08 at 02:43 PM |
|
|
Couple of people have done it.
Look for Liam's car which is a really well engineered version with a Rover 2.7 v6 (Honda) engine.
HTH,
James
------------------------------------------------------------------------------------------------------------
"The fight is won or lost far away from witnesses, behind the lines, in the gym and out there on the road, long before I dance under those lights."
- Muhammad Ali
|
|