stevetzoid
|
| posted on 15/4/08 at 12:00 PM |
|
|
Weber 28/36 Carb
Hi All,
I am desperately looking for an Italian 28/36 weber carb, I race in the Locost series with the 750 Club. I have had a stuttering problem for a long
time and it is hurting me big time. I need to find an original one from an escort 1300 gt or similar if any one can help that would be great. Thanks
in anticipation.
Steve Evans.
|
|
|
|
|
Mr Whippy
|
| posted on 15/4/08 at 12:05 PM |
|
|
a picture of the offending item if it helps -
have you checked the accelerator jet, that will cause stuttering if blocked when you try to accelerate.
 
Rescued attachment carb.jpg
Fame is when your old car is plastered all over the internet
|
|
|
Dingz
|
| posted on 15/4/08 at 01:07 PM |
|
|
What size chokes does it have? I have one in the garage with smaller than 26/27 which is the norm for the 2l. Will look this evening to see what size
they are.
|
|
|
stevetzoid
|
| posted on 15/4/08 at 01:23 PM |
|
|
Hello, I think the chokes have to be 23 and 24 mm. From the 1300gt and sports etc.
Thanks Steve.
|
|
|
richardlee237
|
| posted on 15/4/08 at 02:01 PM |
|
|
The carb you are after is a 32 DGV NOT a 32/36.
the 32/36 has 26 and 27 mm chokes. You need 23/24 mmchokes.
There are tons of 32/36 around but 32 DGV seem as rare as nuts on a rocking horse. 
Quote Lord Kelvin
“Large increases in cost with questionable increases in performance can be tolerated only in race horses and women.”
Quote Richard Lee
"and cars"
|
|
|
richardlee237
|
| posted on 15/4/08 at 02:05 PM |
|
|
A useful little linky dinky
Linky
Quote Lord Kelvin
“Large increases in cost with questionable increases in performance can be tolerated only in race horses and women.”
Quote Richard Lee
"and cars"
|
|
|
The Baron
|
| posted on 15/4/08 at 03:36 PM |
|
|
I got a brand new carb from a place called 'fast road cars'
Linky (i hope!!!) below
http://www.fastroadcars.co.uk/
|
|
|
Dingz
|
| posted on 15/4/08 at 06:00 PM |
|
|
Its a 32 DGAV 5E with 24/23 chokes
, is that good enough? its all there apart from the U bracket the rod linkage clips into.
 
Rescued attachment 32dgav.jpg
|
|
|
stevetzoid
|
| posted on 15/4/08 at 11:03 PM |
|
|
does it have made in spain or italy stamped in the case above the float chamber, visible from the top looking down on it minus the air filter.
Thanks
|
|
|
Dingz
|
| posted on 16/4/08 at 05:40 PM |
|
|
Italy, is that Italian enough?
|
|
|
richardlee237
|
| posted on 17/4/08 at 11:27 AM |
|
|
If you really want a new one, see here
[url=http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=130208039141&mpt=1208431273151&tGUID=6fdc37f51180a09c1875f1c5fff575e9]linky[/url
]
Quote Lord Kelvin
“Large increases in cost with questionable increases in performance can be tolerated only in race horses and women.”
Quote Richard Lee
"and cars"
|
|
|
