Board logo

Fireblade 893 prices
pmc_3 - 1/12/20 at 10:02 PM

I know it's old school now and lots of other options available. How much do you think a complete Fireblade 893 setup removed from a kit is worth? I've been looking at one for sale that is being removed due to upgrade. It includes Complete engine with prop adapter, exhaust manifold, loom, clocks, fuel pump, radiator. It's tempting as a turn key package, I'd only need to make a cradle and sort a prop and maybe some sort of reverse.

It's looking like it could be cheaper than the budget Zetec I've been collecting bits for.


lsdweb - 1/12/20 at 11:17 PM

I've got a complete 919 blade package with mounts, exhaust(s), billet sump, etc available for not a huge amount of money.

It would need a bit of wiring (simple) and possibly a prop (I've got a friend checking if it'll fit his car). The rad is shot but polo ones are cheap!

Thanks and sorry for jumping on your post!

Wyn


big_wasa - 2/12/20 at 07:51 AM

If you have a 2.0 blocktop I would be interested. Thre circle of life


ReMan - 2/12/20 at 08:24 AM

With the bits you mention. Adaptor and the manifold, and other bits IF YOU CAN USE THEM i'd say £350-500 depending on condition. My most recent spare was £300 for a good fully complete engine carbs the lot