FS: Lots of Locost/Xflow parts
thefreak - 16/5/11 at 01:10 PM
I have no idea the going rates on these, so if you think they're overpriced, feel free to make me an offer. They're all surplus now and need
to go.
Front screen, with side supports. £80.00 plus postage
1600 XFlow Sump (slight dent in bottom, ideal for shortening) £15.00 plus postage
1600 Xflow Sump in good condition £25.00 plus postage
Lucas DLB198 Coil for Xflow (never been used) £20.00 plus postage
Brand new replacement Piston Rings for Xflow 80.985mm diameter. 1.59 + 1.98 + 4.00. PN R25106 £10.00 plus postage
1600 XFlow Oil Pickup Pipe £5.00 plus postage
Type 9 Clutch? Just the plate, nothing extra. Motorcraft PN EDC131 £10.00 plus postage
1600 XFlow Roller Rocker assembly. £10.00 plus postage
XFlow Electronic ignition setup. Complete. £50.00 plus postage
XFlow/Type 9 gearbox/starter plate (I think?) damaged. £5.00 plus postage
XFlow/Type 9 gearbox/starter plate (I think?) complete. £10.00 plus postage
XFlow 1300 pistons and conrods (ideal for 1600 upgrade) £10.00 plus postage
All parts can be collected from Gloucester, 3 miles from J12 of the M5.
Like I said, all parts must go, so make an offer if you think it's overpriced 
[Edited on 16-5-11 by thefreak]
Trollyjack - 16/5/11 at 07:15 PM
U2U sent
JacksAvon - 18/5/11 at 03:32 PM
If the electronic dizzy has not gone, I would like it please.
Give me a call on 07769 717180.
Regards
Jack
thefreak - 18/5/11 at 08:15 PM
Sorry, dizzy sold.
thefreak - 19/5/11 at 02:52 PM
Sumps also sold
bilbo - 19/5/11 at 05:25 PM
u2u sent re screen
spiderman - 19/5/11 at 05:50 PM
Roller rocker assembly please if it's still for sale?
AHH I've just seen the picture of the rocker shaft assembly and it looks like they are standard rockers. do the rockers have a spinning roller on
them or just a machine flat? The bit tat contacts the top of the vavle stem?
Cheers
[Edited on 19/5/11 by spiderman]
thefreak - 19/5/11 at 07:32 PM
Sorry, my mistake. I was trying to find the correct name of it and checked Burton's catalogue. Of course their parts wouldn't be standard
It's a standard rocker, nothing fancy about it.
matty h - 20/5/11 at 10:57 AM
Could you tell me the dimensions of the windscreen or do you know if it will fit a MK Indy scuttle.
Thanks Matty
thefreak - 9/6/11 at 10:12 AM
Screen sold.
thefreak - 19/7/11 at 07:27 PM
Pistons, screen, dizzy sold.
Open to offers on the rest.
allard - 20/7/11 at 02:00 PM
Would like damaged type9 starter plate please.
U2U sent with contact details.
Cheers
Alan
johnq - 21/7/11 at 12:45 PM
are the rings still available???
thefreak - 21/7/11 at 01:01 PM
Yes, they sure are.
thefreak - 29/7/11 at 02:59 PM
Rings sold, both dust plates sold