Board logo

Haynes bodywork and a pair of rear arches
Vmax1974 - 13/4/17 at 08:37 PM

I have 2 sets of haynes roadster (gibbs book) front ends to sell both nosecone bonnet and scuttle they are seconds due to a batch of dodgy gelcoat the gelcoat is fully cured just a bit transparent in places so they are perfect for paint or wrap i would like £185 plus post for each set or as close to as possible

I also have a pair of rear arches they are unused and in ok condition there is a couple of voids in the gelcoat but this is close to the return edge so not that noticeable i did not make these and they are not from my moulds but i would like £55 plus post








Vmax1974 - 14/4/17 at 03:11 PM

Any takers i could be open to an exchange of parts if you have something of use

Edwardo - 14/4/17 at 03:35 PM

How wide are the arches please?

Vmax1974 - 15/4/17 at 06:53 AM

quote:
Originally posted by Edwardo
How wide are the arches please?


They are 280mm wide

Vmax1974 - 15/4/17 at 03:25 PM

I will do the nose bonnet scuttle seconds packages for £190 delivered to a uk address

Vmax1974 - 16/4/17 at 05:07 PM

What is it worth for a quick sale on these parts