Board logo

5" Silencer with Cat from Westfield
CrisisWolf - 26/12/17 at 04:05 PM

Removed from my car, had it for a few years after buying from a member on here.



It does need a bit of welding at the front end of the silencer due to some very small cracks which were picked up at the last MOT. Closeups on photos.



Useful as a CAT exhaust if you need one.

Comes with 2x U Bolts and what makes up the majority of the fitting kit less the L bracket and bobbins which remain on my car (yellow shown in a photo less bobbin)



As per westifled site

https://parts.westfield-sportscars.co.uk/engine-drivetrain-exhaust?product_id=167

Collection in Bristol/Bath. Should be able to post.

Offers please.


PAUL FISHER - 27/12/17 at 03:45 AM

Mine broke in the same place after just 200 miles, and they would not replace under warranty, due to it being fitted to a mk Indy, nothing to do with the poor weld😖


CrisisWolf - 27/12/17 at 08:29 AM

Weird. Mines seen at least 8,000 on my Westfield and Im not sure how many before that.

MOT tester said it could be welded up but I took the opportunity to get the Westfield a new for Xmas.


PAUL FISHER - 27/12/17 at 05:52 PM

Martin Keenan at Mk engineering welded mine up after it broke, and it did not break again after being welded correctly 😎