Board logo

clear out crossflow head, zetec mounts/manifold, etc
striker1660 - 21/1/18 at 02:29 PM

bare 1600gt crossflow cylinder head ideal for rebuild. £50








Zetec engine mounts - think there gbs ones they are unused as such as engine was taken out before car was roadworthy by previous owner.

£45 delivered

zetec mounts
zetec mounts


Zetec manifold in good condition gbs straight out then down with heat wrapping . £100







side screens for seven a pair, they need a good clean. £40




5 3/4" chrome headlights pair with wiring good condition £50 delivered




Well for once i managed to upload some pictures until i tried new ones and failed.So the follwing are avaiable and i can send pcitures via an e mail

ford crossflow followers for 1600 8 off
lucas alternator with 6 v ali pulley think its like the zetec belt offers

Locost seven with 1700 crossflow full spec on request.

fibreglass half doors in black pair one is flat the drivers side has elbow recess £70 inc. postage

any enquires please message.


wowblaauw - 21/1/18 at 03:48 PM

Hi, I'm interested in your GBS manifold. Can you let me know that the outside diameter of the connecting section is. Also, will you be able to send via courier. If so, please et me know costs etc by U2U. Thanks, Craig


wowblaauw - 21/1/18 at 03:49 PM

...also the half fibreglass doors. Thanks, Craig