Board logo

wtd: 2.0 zetec
coozer - 16/5/15 at 11:00 PM

Looking for a 2l zetec to build a turbo nutter...

I know I've been here before and sold all the motors and bits and bobs that's been through my hands but hope I can start again for the next project.

Cheers,
Steve

BigFaceDave - 17/5/15 at 05:27 AM

I've got a 2.0 zetec from a 2000 zetec-s, straight out of the car still with gearbox if needed I think it had 109k on the clock and ran a treat before i took it out of a very rusty car. Bought the car of a mate who is a mechanic and has had it for about 5 years so was quite well looked after. I think ive got a video of it running somewhere. I'd like £180 for it and can stick it on a pallet if needed?

Ugg10 - 17/5/15 at 05:55 AM

Here.

http://www.locostbuilders.co.uk/viewthread.php?tid=197981

big_wasa - 17/5/15 at 06:52 AM

quote:
Originally posted by Ugg10
Here.

http://www.locostbuilders.co.uk/viewthread.php?tid=197981



Thats just the head and other odds and sods,

snakebelly - 17/5/15 at 07:17 AM

Actually I do have the bottom end of the original motor as well. Its spun number 3 big end but should be ok for a regrind. It was a crate engine and had done less than 18 months of trackday use. Buy the head for the asking price and ill throw in the bottom end as well.

coozer - 17/5/15 at 08:48 AM

Thanks chaps but I'm looking for a cheap long engine to start and really something that's closer!

Plan is to buy a mondeo or focus donor when the time comes, just wat the motor first to ponder over and gather the parts for turbo conversion.

snakebelly - 17/5/15 at 04:57 PM

Cooler if the engine I have is any use I'm in Salford for 6 weeks starting after the bank holiday if that's any closer for you?

coozer - 17/5/15 at 06:12 PM

Not much closer mate, Salford is 160 miles south!

Mark100 - 20/5/15 at 10:12 AM

getting an untested but complete blacktop at the end of the month as part of a unfinished project I got off the bay
itll be in leeds if that's any good