sammini7
|
| posted on 20/10/17 at 06:56 PM |
|
|
GTS PANTHER - Upright Choice
Hi guys I have purchased a GTS Panther kit, does any body know what uprights are to be used with the kit Cortina or Sierra?
Many Thanks
|
|
|
|
|
big-vee-twin
|
| posted on 20/10/17 at 08:23 PM |
|
|
Both, it was a choice you made when buying. You will need to identify what you have, by measuring them up and comparing
Mine are Sierra
Duratec Engine is fitted, MS2 Extra V3 is assembled and tested, engine running, car now built. IVA passed 26/02/2016
http://www.triangleltd.com
|
|
|
Yorkie
|
| posted on 20/10/17 at 10:24 PM |
|
|
As big-vee-twin says the kit could be specified with either.
Measure the distance from the bushes to the ball joints and i’ll compare with mine.
I have the Sierra uprights.
|
|
|
big_wasa
|
| posted on 21/10/17 at 09:08 AM |
|
|
It was just the top wishbones that where differant. Shorter for the Sierra. I did have the drawings once upon a time.
|
|
|
birdii
|
| posted on 21/10/17 at 09:59 AM |
|
|
Just looked at the drawing I have and it shows 242mm from bush tube centre to the outer edge of the top link tube - this is for Sierra uprights.
If you need either sierra or Cortina uprights I have a pair of both to sell (with calipers).
Dan
|
|
|
sammini7
|
| posted on 21/10/17 at 11:10 AM |
|
|
Thanks for your help.
|
|
|
sammini7
|
| posted on 22/10/17 at 04:23 PM |
|
|
Turns out I have the sierra setup...thanks for all the help guys.
I had hoped that I had the cortina setup as I prefer the simpler upright design and reduced weight, but Sierra it is!
|
|
|
