craig_007
|
| posted on 23/10/09 at 09:04 PM |
|
|
For track use the Mi16 final drive is best mated to a 1900 box,Failing that a 1600 box is good also,forget about the 6 speed box in a 205 though.
|
|
|
|
|
eccsmk
|
| posted on 26/10/09 at 09:03 AM |
|
|
some random pics to add
still no big updates yet 
new wheel bought off marco on here
all the tube for the cage cut to length and gathering rust
one of the seats brackets i started at the weekend
the other is perched on the roll cage tubing (pic above)
the reason one end isnt welded yet, i cant remember the bolt hole centre's and the side that is welded was marked up in the car (9 miles
away)
a random shot of what was removed from the passenger door
and a random engine bay shot (taken when we were marking out for the bonnet pins
more photo's later if i remember to take my camera 
[Edited on 26/10/09 by eccsmk]
|
|
|
eccsmk
|
| posted on 28/10/09 at 05:07 PM |
|
|
decat day
|
|
|
eccsmk
|
| posted on 2/11/09 at 09:22 PM |
|
|
woohoo the evo is out of the garage
forgive the qualtiy of the pics,
|
|
|
Andy D
|
| posted on 3/11/09 at 11:00 AM |
|
|
Dont forget to put the rad cap on.  
|
|
|
eccsmk
|
| posted on 3/11/09 at 10:31 PM |
|
|
quote:
Originally posted by Andy D
Dont forget to put the rad cap on.
i had a funny feeling someoe would spot that
thaught it best to check the antifreeze seeing as its just been rebuilt
|
|
|
Ninehigh
|
| posted on 7/11/09 at 07:08 PM |
|
|
Looking nice One day I'll be able to afford stuff like that and then I'll be complaining about how much my insurance is!
|
|
|
G.Man
|
| posted on 11/11/09 at 03:20 PM |
|
|
Some updated pics of my build..
Rust treatment in engine bay
Rebuilt Xsara VTS PAS Rack (2.4 turns lock to lock)
Opinions are like backsides..
Everyone has one, nobody wants to hear it and only other peoples stink!
|
|
|
G.Man
|
| posted on 15/11/09 at 09:58 AM |
|
|
More pics
Xsara VTS rack 2.4 turns lock to lock
TranX Plate Diff
Opinions are like backsides..
Everyone has one, nobody wants to hear it and only other peoples stink!
|
|
|
G.Man
|
| posted on 22/11/09 at 09:02 AM |
|
|
Finished!
Opinions are like backsides..
Everyone has one, nobody wants to hear it and only other peoples stink!
|
|
|
eccsmk
|
| posted on 30/5/10 at 07:55 PM |
|
|
a little update
dash back in
seat and cage in
polycarb windows fitted (fronts only)
rear view
bad news is ive smashed 3rd gear so its engine and box back out (for the third time)
first was for cambelt clutch water pump and engine mount
second was for clutch arm bearing (a nylon bush that sits in the box to support the clutch arm)
and now third is non existant !!
still i have these waiting to go on
|
|
|
chris mason
|
| posted on 30/5/10 at 08:40 PM |
|
|
Pull your finger out Martin, and you can do the Cadwell trackday that some of us are doing on July the 7th, no excuses or bu!!5hit, just get on the
track you big girl 
If the Sr2's not finished in time then i may well be in the van
|
|
|
eccsmk
|
| posted on 30/5/10 at 08:45 PM |
|
|
quote:
Originally posted by chris mason
Pull your finger out Martin, and you can do the Cadwell trackday that some of us are doing on July the 7th, no excuses or bu!!5hit, just get on the
track you big girl
If the Sr2's not finished in time then i may well be in the van
i've been waiting for you to post
i might leave it as it is and kill the box all together
see you on the 7th mr mason
|
|
|
eccsmk
|
| posted on 12/6/10 at 10:17 AM |
|
|
the bits for my gearbox arrived today
so as well as sorting the indy i now have the peugeot to strip down
|
|
|
