MikeR
|
| posted on 6/10/20 at 10:12 AM |
|
|
Ooops my mistake, I missread the diff as propshaft. i'm tired (insert other poor excuses here)
|
|
|
|
|
Badger_McLetcher
|
| posted on 7/10/20 at 07:12 AM |
|
|
quote:
Originally posted by CosKev3
Get the oil out of it sharpish,will probs stink of fuel.
I learnt the hard way with my first engine,drive to the RR with over fueling.
Span four big ends in the rods on my first spirited drive
Bloody hell  Thanks for the heads up - I've got to drop the sump anyway to change the gasket, so an oil change is definitely on the cards!
sdh2903 has very kindly shared their map and I'm currently in the middle of making a hybrid one that'll hopefully be a lot better.
I had spent a bit of time mapping and leaning it out for the emissions, but I cocked up with the adaptive map as it looks like it was aiming for
about 12.5:1 - not sure how/why I set it to that, or even if I did! A bit embarrassing really!
If disfunction is a function, then I must be some kind of genius.
|
|
|
starterman
|
| posted on 7/10/20 at 12:28 PM |
|
|
Guess what?
I've just had tomorrows IVA postponed for the second time.................................
|
|
|
Deckman001
|
| posted on 7/10/20 at 01:09 PM |
|
|
quote:
Originally posted by starterman
Guess what?
I've just had tomorrows IVA postponed for the second time.................................
Oh dear that's not good 
Jason
|
|
|
jps
|
| posted on 7/10/20 at 01:22 PM |
|
|
quote:
Originally posted by Badger_McLetcherside repeater pods that allowed me to move my side repeaters further forwards to meet the 2.6m rule
(see below).
 
Out of interest - how come you didn't mount the 'new/further forward' side repeaters the same way you did the ones that are already
there? (I appreciate the answer might be 'so you can more easily take them off post-test!). Just wondered whether it was to do with achieving a
minimum height or something...
|
|
|
Badger_McLetcher
|
| posted on 8/10/20 at 06:59 AM |
|
|
quote:
Originally posted by starterman
Guess what?
I've just had tomorrows IVA postponed for the second time.................................
That sucks, sorry to hear it
quote:
Originally posted by jps
Out of interest - how come you didn't mount the 'new/further forward' side repeaters the same way you did the ones that are already
there? (I appreciate the answer might be 'so you can more easily take them off post-test!). Just wondered whether it was to do with achieving a
minimum height or something...
Yep, you've kinda got it - it's basically so I didn't have to put new holes in the arches! The wires loop around the edge of the
wheel arch, and I just made up some short patch leads to extend them 
If disfunction is a function, then I must be some kind of genius.
|
|
|
jps
|
| posted on 8/10/20 at 10:53 AM |
|
|
quote:
Originally posted by Badger_McLetcher
it's basically so I didn't have to put new holes in the arches! The wires loop around the edge of the wheel arch, and I just made up some
short patch leads to extend them
Fair enough. I reckon you'll be able to sell these many times over to future IVA-victims for exactly the same purpose!
|
|
|
Badger_McLetcher
|
| posted on 9/10/20 at 08:21 AM |
|
|
quote:
Originally posted by jps
quote:
Originally posted by Badger_McLetcher
it's basically so I didn't have to put new holes in the arches! The wires loop around the edge of the wheel arch, and I just made up some
short patch leads to extend them
Fair enough. I reckon you'll be able to sell these many times over to future IVA-victims for exactly the same purpose!
Unfortunately they're pretty unique to the wing - I had to make different profiles for the left and right ones to get them to fit properly!
Gotta love the dimensional accuracy of fibreglass 
If disfunction is a function, then I must be some kind of genius.
|
|
|
