Johneturbo
|
| posted on 23/2/08 at 06:55 PM |
|
|
Cheers adrian, that diagram is a great help for my feeble brain.
and well done for keeping the receipt, i seem to loose them before i leave the shop.
i'll have a go at this next week
|
|
|
|
|
adithorp
|
| posted on 23/2/08 at 11:11 PM |
|
|
The recipts are for enough bits to make 2. Just incase I f*&%$d up the first attempt.
adrian
|
|
|
Johneturbo
|
| posted on 29/2/08 at 03:19 PM |
|
|
I made bobs box of tricks. and it worked!
even with my lack of electricary skills
thanks bob. and adrian for that simpler diagram to follow.
here's a pic of my creation
 
Rescued attachment exupBoard.jpg
|
|
|
Bob C
|
| posted on 29/2/08 at 07:37 PM |
|
|
Looks mint Johnnie!
I'd run it for a while, til you're confident, then pot it in bathroom sealant or something like. Otherwise 1) eventually the wires will
work harden and break near where they're soldered to the board and 2) the copper foil on the stripboard will corrode away in time.
Nice neat job, nice wee box, great!
|
|
|
bassett
|
| posted on 17/7/08 at 05:53 PM |
|
|
sorry to bring up an old thread guys but which bits need soldering together as im useless at reading wiring stuff and want to do it right.
cheers
My MNR Blog Updated Jan 2010 - Track Day Prep Begins!
|
|
|
bones
|
| posted on 7/6/09 at 09:33 PM |
|
|
Just got round to making one of these for my BEB after ditching the constantly sticking EXUP.
Great write up fellas, worked first time.
Got me in the mood for maybe trying a home made shift light, so had a poke around and found a possible starting point. Anyone had a go at this yet?
Cheers.
The amalgamation of marginal gains
|
|
|
