wrigglypig
|
| posted on 26/12/08 at 11:58 PM |
|
|
chassis plates
Is there something wron with my eyes?? I cant find any info on the chassis plate drawings giving the metal thicknesses?????
|
|
|
|
|
mark chandler
|
| posted on 27/12/08 at 12:03 AM |
|
|
You just bash some numbers into the frame in a couple of points, maybe the 1/4" gusset on the lower front wishbone and something easier to see,
in my case this is a small plate stamped and rivited to the bulkhead.
|
|
|
liam.mccaffrey
|
| posted on 27/12/08 at 12:19 AM |
|
|
i don't think he means that
Build Blog
Build Photo Album
|
|
|
blakep82
|
| posted on 27/12/08 at 01:34 AM |
|
|
don't quote me, but 3 or 5mm seems the norm
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
Alan B
|
| posted on 27/12/08 at 01:41 AM |
|
|
My copy of Chris's book shows all the thickness's.....eg. page 175 top right...Chassis plate CP12, Chassis plate CP13, 3 Plate.....3 is
the thickness
HTH
Alan
|
|
|
wrigglypig
|
| posted on 27/12/08 at 10:16 AM |
|
|
Cheers guys , yes that was what I was meaning all the individual webs, gussetts etc
|
|
|
