wrigglypig
|
| posted on 2/1/09 at 11:26 PM |
|
|
I does nt add up, does it??
Haynes Roadster book page 175 Chassis plate 11 The measurement 275mm plus the 132 add up to 407mm but the radius of 412mm is shown for the arc. A
difference of 5mm this should leave a small flat at the top of the plate ? Yet it does not show one ? can anyone shed any light on this for me please.
Kev
|
|
|
|
|
David Jenkins
|
| posted on 3/1/09 at 08:56 AM |
|
|
Have you looked at all the corrections that Chris has posted on the Haynes forum?
(there are quite a few...)
|
|
|
chrisg
|
| posted on 3/1/09 at 01:55 PM |
|
|
In theory there is a slight discrepency but to ensure that the plate is not cut undersize there is no allowance for the plate thickness (SS1).
In practice most people would fit SS1 and make a template to make CP11, there can be considerable differences between different chassis when they get
to this stage through distortion and slight dimensional errors.
The most important thing is to ensure that plate CP11 fills the SS1/D7-D8 area accurately and I'd suggest that making a template once SS1 is in
place is the best bet.
Hope this helps
Cheers
Chris 
Note to all: I really don't know when to leave well alone. I tried to get clever with the mods, then when they gave me a lifeline to see the
error of my ways, I tried to incite more trouble via u2u. So now I'm banned, never to return again. They should have done it years ago!
|
|
|
wrigglypig
|
| posted on 3/1/09 at 02:59 PM |
|
|
Thanks guys I can get cracking now
|
|
|
